what causes the wobble in the steering on a zook?
i know what to fix on coil sprung vehicles like my GU etc.. but i know fark all about leaf sprung zooks.
its still SPUA, but its got suzuki carryvan springs in the front.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wobble in steering
wobble in steering
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
il try change the wheels from another one maybe?
i dont really want to spend any money on it as its not going to stay on the road for too much longer. and all im doing with it in the meantime would be the occasional trip not too far from home.
could the bushes have anything to do with it? if i can take it out and put into the other one im building then i dont mind spending a bit
i dont really want to spend any money on it as its not going to stay on the road for too much longer. and all im doing with it in the meantime would be the occasional trip not too far from home.
could the bushes have anything to do with it? if i can take it out and put into the other one im building then i dont mind spending a bit
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
how much they usually cost?gman79au wrote:swivel hub seals play a big part it absorbing road vibrations and stopping some wobbles, try replacing the swivel hub seals and bearings
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
its been a while no more than 30 bucks a side for seals and bearings about 10bucks each ( there are 4) don't quote me its been a while.
you can buy a swivel hub rebuild kit which come with every thing you need, its just a long job about 3 to 4 hours per side if done properly (cleaning etc) I used to get the kits from GRP auto when Greg was there.
you can buy a swivel hub rebuild kit which come with every thing you need, its just a long job about 3 to 4 hours per side if done properly (cleaning etc) I used to get the kits from GRP auto when Greg was there.
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
wouldnt that only help if there was play in the steering?boner59 wrote:steering box tighten the nut/screw on top and see if that helps
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
don't knowj-top paj wrote:wouldnt that only help if there was play in the steering?boner59 wrote:steering box tighten the nut/screw on top and see if that helps
slugs are just snails that sold their belongings for drug money
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
this is a swivel kit
http://cgi.ebay.com.au/4X4-SWIVEL-HUB-K ... dZViewItem
http://cgi.ebay.com.au/4X4-SWIVEL-HUB-K ... dZViewItem
make sure the tyres dont have rocks inside, i recently put my old tyres back on and they either had rocks, or the rubber inside had degraded and fallen apart.. would wobble like crazy if i hit a small bump and would have to slow to a stop to get it to calm down.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
If the swivel hub bearings are gone you may as well do the wheel bearings also (which could very well be the problem). Also check your tie rod ends, if there has been a front end shimmy for long enough they could very well be stuffed too.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
lossen the nut then tighten the screw but make shure you don't overtightenwellsey wrote:So its the flat head screw on top of the steering box for adjustment, not the nut?
slugs are just snails that sold their belongings for drug money
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
J-top, a litle extra detail on tightening the steering box.
And yes, it can eliminate steering vibration even when there is no apparent freeplay. My Sierra would practically shake itself off the road when it reached 75kmh until I got this right!
Loosen the locknut, then slightly back off the lockbolt.
Turn the bolt down again till it makes contact. Just firm contact, wiggle it back and forth a couple of times to make sure, and don't over-tighten it.
Hold the bolt with firm screwdriver while you tighten locknut.
I check mine every six months (but hey, it is 22 years old after all!)
HTH - Longbaser.
And yes, it can eliminate steering vibration even when there is no apparent freeplay. My Sierra would practically shake itself off the road when it reached 75kmh until I got this right!
Loosen the locknut, then slightly back off the lockbolt.
Turn the bolt down again till it makes contact. Just firm contact, wiggle it back and forth a couple of times to make sure, and don't over-tighten it.
Hold the bolt with firm screwdriver while you tighten locknut.
I check mine every six months (but hey, it is 22 years old after all!)
HTH - Longbaser.
An economist is an expert who will know tomorrow why the things he predicted yesterday didn't happen today. ― Laurence J. Peter
Wheel bearings. and swivel hub kit. possibly steering adjustment but if you think about it it shouldnt need adjusting all the time it might be masking another problem!
mine does the same if i use large offset rims F100 15x8 25mm outer spacing.
its ok with 215 and 235 but as soon as i put the larger offset rims on its really noticible.
I am about to re kit my front diff with everything, just waiting on time and money
mine does the same if i use large offset rims F100 15x8 25mm outer spacing.
its ok with 215 and 235 but as soon as i put the larger offset rims on its really noticible.
I am about to re kit my front diff with everything, just waiting on time and money
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Who is online
Users browsing this forum: No registered users and 33 guests