Does anyone know of e good driveline/driveshaft company in melb,
prefer south east suburbs?
I have an 80 series cruiser, after fitting lift kit I have driveline issues.
I have fitted a double cardon joint to front shaft but hasnt fixed problem completly.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Driveline Company in melb??
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Driveline Company in melb??
The moose is on the loose!
What lift size did you put in?
I have just purchased 6inch Dobinson spings and will be fitting them this weekend... so ill more than likely have a few driveline issues to over come myself.
I have just purchased 6inch Dobinson spings and will be fitting them this weekend... so ill more than likely have a few driveline issues to over come myself.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
I`ve put in the tough dog soft 6 inch lift, was told with accecories it will
drop to a good 5 inch. but I couldnt drive it with front shaft in untill i got
double cardon.
Still not happy thats why i want to get second opinion.
Drove fine before lift went in.
Getting part time kit today, but that still dont fully solve my problem.
drop to a good 5 inch. but I couldnt drive it with front shaft in untill i got
double cardon.
Still not happy thats why i want to get second opinion.
Drove fine before lift went in.
Getting part time kit today, but that still dont fully solve my problem.
The moose is on the loose!
I have had good experiences with Total Traction Drivelines in Moorabbin. Talk to Matt on 03-95551501.
The recently rebuilt the rear axle on my GQ patrol after it was damaged due to the previous owner not torquing the pinion nut correctly after replacing a seal. They have all the right tools and a full manufacturing workship for anything unusual. They used to have the contract building what became the TJM pro lockers.
The recently rebuilt the rear axle on my GQ patrol after it was damaged due to the previous owner not torquing the pinion nut correctly after replacing a seal. They have all the right tools and a full manufacturing workship for anything unusual. They used to have the contract building what became the TJM pro lockers.
DRIVELINE SERVICIS have just opened anew branch
in MELB, they now have a few branches in each state..
they specalise in all aspects of vechile driveline, with
custome driveshafts being a speciality of theres..
they sponsor quite a few comp rigs,& have there own
modified 80 comp rig.Ring little allen on 0732757600
for all your advice,& your nearest DRIVELINE SERVICES
good luck with your project....PIGLET....
in MELB, they now have a few branches in each state..
they specalise in all aspects of vechile driveline, with
custome driveshafts being a speciality of theres..
they sponsor quite a few comp rigs,& have there own
modified 80 comp rig.Ring little allen on 0732757600
for all your advice,& your nearest DRIVELINE SERVICES
good luck with your project....PIGLET....
Who is online
Users browsing this forum: No registered users and 10 guests