Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engineers Certificate Needed??
Moderators: toaddog, Elmo, DUDELUX
Engineers Certificate Needed??
If i changed a 91 hilux 2.8 diesel engine over to a 3.0 diesel would i need an engineers certificate? Been told i would if it was a 2.4 originally but not if its a 2.8... Any thoughts or help guys?
Not sure about the engine but I know for sure in Vic. you cannot
just get a certificate for the engine mod. The engineer has to give
a certificate for the WHOLE vehicle. So if its lifted, diff wheels,
bullbar, lights, gauges, seats etc etc etc they have to do the
whole thing along with the engine mod.
Its Vicroad's rules not the engineers.
Really sucks I know
just get a certificate for the engine mod. The engineer has to give
a certificate for the WHOLE vehicle. So if its lifted, diff wheels,
bullbar, lights, gauges, seats etc etc etc they have to do the
whole thing along with the engine mod.
Its Vicroad's rules not the engineers.
Really sucks I know
What could possibly go wrong????
so if it needs a certificate i'd be stuffed, but if it doesnt need one, im fine?? Surely someone has put a 3.0 into an earlier hilux !! haha
Found a really good buy, but its a 91 with a 3.0 in it, and im really worried it will need an engineers cert.. The owner assures me its registered with the 3.0 in it already, and vic roads siad it does need one, and when i rang an engineer he said it DOESNT need one IF it came originally with a 2.8, this is because its less than 10% displacement increase.
Found a really good buy, but its a 91 with a 3.0 in it, and im really worried it will need an engineers cert.. The owner assures me its registered with the 3.0 in it already, and vic roads siad it does need one, and when i rang an engineer he said it DOESNT need one IF it came originally with a 2.8, this is because its less than 10% displacement increase.
If Vicroads say it needs one then it needs one. Everyone else
can say what they like but their the ones with the power.
My talks with the Engineer were "If thats what Vicroads specify
then thats gospel no matter what I think" Their GOD. end of story.
Still sucks I know.
Mind you if its already registered with a 3lt in it the chances of
somone questioning the conversion is probably minimal. ?????
can say what they like but their the ones with the power.
My talks with the Engineer were "If thats what Vicroads specify
then thats gospel no matter what I think" Their GOD. end of story.
Still sucks I know.
Mind you if its already registered with a 3lt in it the chances of
somone questioning the conversion is probably minimal. ?????
What could possibly go wrong????
Who is online
Users browsing this forum: No registered users and 2 guests