I have been shown the benefits of lockers again on the weekend, and am tossing up the idea of a diff swap, a gen 2 8" HP diff would be my first choice, but with only 4.875 on offer (though my cousin thinks he could find someone to maybe cut a set of c&p gears for the HP). So a gen 1 8" LP diff with 5.29s is my second choice as I don't want an auto-locker. (Though as the detroit is machined by Geelong Diffs I was wondering if the eaton E-locker could be done the same?)
what mods were needed to fit the gen 1 diff?
as the diff-disconnect is not on the gen 1 diff, can the hubs be left locked so I can still use the 2WD/4WD shift on the fly?
was it worth the effort to get 5.29 gears and an air locker?
are there any downsides to this conversion?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gen 1 8" LP diff into gen 2 pajero
Moderator: -Scott-
gen 1 8" LP diff into gen 2 pajero
NH 2.5TDI LWB GLS
Who is online
Users browsing this forum: No registered users and 1 guest