Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lowrange 4.9's
Lowrange 4.9's
Hi all
just ordered lowrange offroad 4.9 tcase gears from( www.lowrangeoffroad.com *free plug*) last night 11/07/07, so sean will hopefully recieve my email this morning and process my transaction along with my payment and this email will give others a chance to see how long postage takes and the price of postage.
I bought these gears just as they came off sale, so had to pay the full $595USD instead of $535. Sean took the $5 of the price and with the $110 postage fee brings the hole package to $700. In AUD this now equates to $812.20 at the current exchange rates of around 86cents, which seems to be around $400 cheaper then 4.9's in Aus...
Will keep thread postage as my new gears arrive.
Brenno
just ordered lowrange offroad 4.9 tcase gears from( www.lowrangeoffroad.com *free plug*) last night 11/07/07, so sean will hopefully recieve my email this morning and process my transaction along with my payment and this email will give others a chance to see how long postage takes and the price of postage.
I bought these gears just as they came off sale, so had to pay the full $595USD instead of $535. Sean took the $5 of the price and with the $110 postage fee brings the hole package to $700. In AUD this now equates to $812.20 at the current exchange rates of around 86cents, which seems to be around $400 cheaper then 4.9's in Aus...
Will keep thread postage as my new gears arrive.
Brenno
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Great purchase Spike. These gears are tough. Make sure you also get a full bearing kit as well when you put the new gears in. I think it cost me around 100-120 to get all of the bearings...one of them was a genuine part only that I had to get direct from suzuki. Or the bearing places I went to couldn't get them in. Sean was great to deal with. I got my lock rite and gears at the same time and it came in at an awesome deal. easily under a grand AUS.
I've had the 4.9s for about 5 months with 31s, standard WT diffs and front lock rite. Have broken both front CVs due to a lot of traction + not thinking about my driving style. I've readjusted my driving style and haven't had any issues whatsoever since then. I actually have more fun now than before when I was probably a little too heavy on the right foot.
Oh Yeah, Just a side note, the gearset that www.lowrangeoffroad.com sell are the Trail Tough 4.9s. He's just a reseller. Don't know if you realised that or not.
Has made an absolute world of difference, the gearing is out of this world and high range is close to perfect on the highway. Mine easily cruises at 100 @ around 3700 rpm from memory.
Its a perfect all round car for victorian conditions (steep muddy rutted stuff) and drives on road like its stock.
P.S. Nic is that your new build in your avatar?! That is one CRAZY Pic! what the story behind it?
I've had the 4.9s for about 5 months with 31s, standard WT diffs and front lock rite. Have broken both front CVs due to a lot of traction + not thinking about my driving style. I've readjusted my driving style and haven't had any issues whatsoever since then. I actually have more fun now than before when I was probably a little too heavy on the right foot.
Oh Yeah, Just a side note, the gearset that www.lowrangeoffroad.com sell are the Trail Tough 4.9s. He's just a reseller. Don't know if you realised that or not.
Has made an absolute world of difference, the gearing is out of this world and high range is close to perfect on the highway. Mine easily cruises at 100 @ around 3700 rpm from memory.
Its a perfect all round car for victorian conditions (steep muddy rutted stuff) and drives on road like its stock.
P.S. Nic is that your new build in your avatar?! That is one CRAZY Pic! what the story behind it?
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
yes yes it is the new zook he he.
thread on answers is my zook thread in sig and v
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=102100
thx for info. i am still working out driving style with the 1.6 and working out if need gears and the 4.9s look the best for me so far from researching.
thread on answers is my zook thread in sig and v
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=102100
thx for info. i am still working out driving style with the 1.6 and working out if need gears and the 4.9s look the best for me so far from researching.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
With the 1.6L and 4.9 tranny gears it'll be an absolute weapon. The 1.3 is quite sufficient and I rarely run out of power in any situation, I'd love to have a 1.6 with the gears though! Just be careful of breakages!
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
well no, as i dont think my emails have been getting through. Tried giving them a call both yesterday morning and today at 7am (which is there time 3.30pm with daylight savings) but havnt been able to get through. Left a message tho.
ive been a bit slack on it as uni just went back and havnt had the time, but chasing it up now. Hopefully he comes on this board.
ive been a bit slack on it as uni just went back and havnt had the time, but chasing it up now. Hopefully he comes on this board.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
doh ! so i might be running my series ones at willoglen by the sounds of things and just have to doge the rest of the car up to get it going , and do it again properly when the bits arrive .
spike did you pay via credit card or by derit deposit?
what is there phone number ?
spike did you pay via credit card or by derit deposit?
what is there phone number ?
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
phone number to call from aus is 001118018056644zookjedi wrote:doh ! so i might be running my series ones at willoglen by the sounds of things and just have to doge the rest of the car up to get it going , and do it again properly when the bits arrive .
spike did you pay via credit card or by derit deposit?
what is there phone number ?
i called him sean this morning at 630am(2-3pm there time) and paid with credit card. should be here next friday, and also got rebuild kit too. yay
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
gears
I paid for my 6.5:1 set and rebuild kit by Paypal a couple of days ago.. Paypal attracts an extra 4% fee but I had the funds there already. AUS$812 delivered. LowRangeOffroad.
Can't wait to GO SLOW. 31's and stock gearing is way too fast.
Shrek Zook : less than a week? Awesome....
Can't wait to GO SLOW. 31's and stock gearing is way too fast.
Shrek Zook : less than a week? Awesome....
gears
My 6.5:1 gears arrived today.
Six days from payment..... AWESOME. I hope I can get them fitted by the weekend. www.lowrangeoffroad.com
Six days from payment..... AWESOME. I hope I can get them fitted by the weekend. www.lowrangeoffroad.com
So long as the total order is under AU$1000 landed, no duty.
If it's over $1k, 5% customs duty 10% GST on the final landed price.
Steve.
If it's over $1k, 5% customs duty 10% GST on the final landed price.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
boo yah, 6 days from phone call and i have some 4.9's sitting in front of me. Now that is what i call service!
for www.lowrangeoffroad.com
for www.lowrangeoffroad.com
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
gears
I rebuilt my transfer today with a 6.5:1 gears and bearing set...
I'm stoked. My 5th gear low is now lower than 1st low used to be with stock gears. Max speed in (5th)low is about 25km/h . I haven't really driven it yet. High range is better too. I only went a couple of kays but I got to use 5th This weekend will be fun.
I have never rebuilt a transfer or gearbox before and it took me about 6 and a half hours. Drive in - Drive out. I HAD to buy a press. (6000kg supercrap $119) Missus thought that was a bit much till I explained how much I saved by fitting gears myself. Bring on the weekend
I'm stoked. My 5th gear low is now lower than 1st low used to be with stock gears. Max speed in (5th)low is about 25km/h . I haven't really driven it yet. High range is better too. I only went a couple of kays but I got to use 5th This weekend will be fun.
I have never rebuilt a transfer or gearbox before and it took me about 6 and a half hours. Drive in - Drive out. I HAD to buy a press. (6000kg supercrap $119) Missus thought that was a bit much till I explained how much I saved by fitting gears myself. Bring on the weekend
I just got my gears in (Calmini) And the difference is unbelievable! ON the 31's in 5th low flat out the speedo neddle hasnt even moved!
I was gonna go these ones but the ones i got came up cheap so jumped on em!
WILL NEVER GO BACK!
I was gonna go these ones but the ones i got came up cheap so jumped on em!
WILL NEVER GO BACK!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
so definately need a press then hey?, Bugger was hoping i didnt have too.
Will try and have a crack at them tomorrow night, have pulled apart a tcase before but never had to pul the bearings off.
Thanks.
Will try and have a crack at them tomorrow night, have pulled apart a tcase before but never had to pul the bearings off.
Thanks.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
You don't have to buy a press......................aw shiat sorry did the missus hear.
When I did mine i just took mine into transmission workshop and got them to press the gears on $20, or as others have done some piping and a BFH (just like many do with bearings)
When I did mine i just took mine into transmission workshop and got them to press the gears on $20, or as others have done some piping and a BFH (just like many do with bearings)
'89 SWB Soft Top, 6.5:1 Calmini gears, rear Lockright, 31s, pwr steering. 1.3 16vmpfi 1300 going in
To get the gears off you can use a gear puller (3 jaw 200mm from SuperCheap about $40) or once agian (though I am not recommending) BFH. You may break teeth, but these are the gears coming off not you new ones.
'89 SWB Soft Top, 6.5:1 Calmini gears, rear Lockright, 31s, pwr steering. 1.3 16vmpfi 1300 going in
gears
I didn't really HAVE to buy a press but the opportunity was too good to pass up. I could have gone somewhere but then I wouldn't have a press in my shed for next time I need it?
I wouldn't use a hammer to remove or fit gears, bearings or lock rings. Too easy to damage something or hurt yourself. The gearset cost enough $$ and are easy to smash with a wayward hammer blow.
I wouldn't use a hammer to remove or fit gears, bearings or lock rings. Too easy to damage something or hurt yourself. The gearset cost enough $$ and are easy to smash with a wayward hammer blow.
MY GOD!!!! These gears are awesome!!!!
took about 4 hours total, made a few mistakes when putting it together, best to label, and take pictures so you remember. Also dont need a press, can be hit with hammer/rubber mallet and tube didnt hurt any of my bearings. GET THESE GEARS!!!! i can idle up stuff i couldnt even bounce up before, not even touching the throttle. The bling stickers are cool too
took about 4 hours total, made a few mistakes when putting it together, best to label, and take pictures so you remember. Also dont need a press, can be hit with hammer/rubber mallet and tube didnt hurt any of my bearings. GET THESE GEARS!!!! i can idle up stuff i couldnt even bounce up before, not even touching the throttle. The bling stickers are cool too
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Bought new 6.5s recently and can't recommend Sean at http://www.lowrangeoffroad.com highly enough. Good service and 5 days from dispatch to my front door, thursday to tuesday.
Good service, quality and price.
Good service, quality and price.
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Who is online
Users browsing this forum: No registered users and 5 guests