Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mav Clutch simply wearing out? UPDATE: Problem found...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Mav Clutch simply wearing out? UPDATE: Problem found...

Post by MAVRK-4 »

92 Mav TB42 with 33's

After a recent play weekend my clutch engaging height has appeared to change all of a sudden (perhaps... never noticed it so much before!)

It's now only just engaging the clutch with my foot almost completely off the pedal where it even takes a lot to stall the engine with the brakes on.

The clutch isn't slipping at all yet, so is it just a case of adjusting the pedal to correct it? and is it a tell tale sign the clutch is on it's way out sometime soon?

Adjust it or worthwhile replacing now before dramas on a trip? Or something else?
Last edited by MAVRK-4 on Fri Aug 10, 2007 9:53 pm, edited 1 time in total.
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

mate id hate to tell you but the clutch is hydraulic which makes it auto adjusting. I had the same problem when i bought my car, and what this means in short is that its time for a new clutch.

Bite the bullet and put a decent one in there and that way you wont have to worry about doing it for a while
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

There is still adjustment between the pedal and the master cylinder. But it wont have changed in one day.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

So what I can see from previous posts on new clutches...

An Exedy Safari Tuff Clutch to suit a TD42 (NSK-6830ST) will fit straight up to what I have with the Petrol TB42 - correct?

I'll make sure the flywheel is machined and go a new rear main seal at the same time.

Thanks.

Edit: Ok just noticed while a Ford Maverick Petrol has no Safari Tuff Kit listed, the GQ Patrol Petrol has one as a NSK-6831ST...

Is this Petrol clutch different specs to the Diesel Safari Tuff?
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Go looking for a "4terrain" clutch, there about the same price as a safari clutch but have a better clamping pressure
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

I may have discovered half my problem on closer inspection today...

It appears there is oil leaking from the water drain plug on the bellhousing, I removed the little plug and none ran out but over the weekend I'll move the truck to level ground and then also check the gearbox fluid level and determine which is leaking.

I guess it's either the front seal from the engine or the rear main seal leaking transmission fluid, either way safe to say the clutch is now poo!

bugger!

-Brenton.
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

damn mate thats no good, spend the dough on the safari tough clutch kit and do your seals, youll never regret it very good feeling clutch
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests