Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how strong are danas?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 165
Joined: Sat Apr 28, 2007 3:32 pm
Location: Brisvegas

how strong are danas?

Post by havoc_customs »

just wondering how strong danas are out of the f trucks.

i run 39.5 inch swampers and MK patrol diffs just dont cut it. was thinking of doing a conversion inc the injected 351 and auto. thoughts?
yeah i got your ' jeep thing ' now it burns when i pee
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

I would run GQ diffs, just because they are cheaper, and same stud pattern. They are also stronger, standard, than the D44 and 9" are standard, and you can sell the F truck diffs for more than the GQ diffs will cost you.

The Ftruck diffs will be 3.5 ratio, and GQ diffs will be 3.9 or 4.1. 3.9's are not sought after, so will be cheapest.
I sold my GQ diff pair for about $1000 a few years ago, they are cheaper now.
The 9" will get around $600- 800 on ebay, the D44 will also get good money, either here or ebay.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

GQ/GU diffs,
get a h260 for the rear and you should be fine
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

You can also buy GQ Chromo CV's now.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

sierrajim wrote:You can also buy GQ Chromo CV's now.
how much are they aprox?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 165
Joined: Sat Apr 28, 2007 3:32 pm
Location: Brisvegas

Post by havoc_customs »

the ones from Cal offroad $1950 for the set.

the H260.. is that the one with the rather large centre?
yeah i got your ' jeep thing ' now it burns when i pee
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

a Built set of Dana60 is what you should do man.

Look at the cost to purchase/built a set of GQ/GU diff's compared to a built set of Dana60's.
60's will be more up front but last longer and rarely if ever have a problem.

These new CalOffroad Axles are the more expensive than build D60 axles' and sure as hell NO WERE NEAR AS STRONG!

Do the D60's!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

havoc_customs wrote:the ones from Cal offroad $1950 for the set.

the H260.. is that the one with the rather large centre?
yep ;)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

WICKED wrote:.

These new CalOffroad Axles are the more expensive than build D60 axles' and sure as hell NO WERE NEAR AS STRONG!

Do the D60's!
so whats the price of a built d60 front?

and were did u get your facts about strengths?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

redzook wrote:
WICKED wrote:.

These new CalOffroad Axles are the more expensive than build D60 axles' and sure as hell NO WERE NEAR AS STRONG!

Do the D60's!
so whats the price of a built d60 front?

and were did u get your facts about strengths?
Tim AXLES not complete housing.
Read the Spec's on the built axles and how the and manufactured then ask Cal the same questions. see what you think but above is my Opinion.
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

WICKED wrote:
redzook wrote:
WICKED wrote:.

These new CalOffroad Axles are the more expensive than build D60 axles' and sure as hell NO WERE NEAR AS STRONG!

Do the D60's!
so whats the price of a built d60 front?

and were did u get your facts about strengths?
Tim AXLES not complete housing.
Read the Spec's on the built axles and how the and manufactured then ask Cal the same questions. see what you think but above is my Opinion.
i thought u were talking about complete setups


overall the patrol junk would be cheaper
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

redzook wrote:
WICKED wrote:
redzook wrote:
WICKED wrote:.

These new CalOffroad Axles are the more expensive than build D60 axles' and sure as hell NO WERE NEAR AS STRONG!

Do the D60's!
so whats the price of a built d60 front?

and were did u get your facts about strengths?
Tim AXLES not complete housing.
Read the Spec's on the built axles and how the and manufactured then ask Cal the same questions. see what you think but above is my Opinion.
i thought u were talking about complete setups


overall the patrol junk would be cheaper
That depends on what your starting with. If you need to buy the GQ diff then axles,CVs,Gears and a locker your better off in the long run buying a SOLID D60.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Built Nissan shit or built D60, mmmm I wouldn't go the Nissan diffs if I was paying for them.
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

sierrajim wrote:You can also buy GQ Chromo CV's now.
Where .?

I thought Nissan diff are nice .. and good but for real upgrade Cost vs benefit D60 set 35splines or 40 if you really want go bigger ..

Mire cheap R&P and all stuff ..

Aaa Corporate 14 bolts rear .. your best bet.
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

Tapage wrote:
sierrajim wrote:You can also buy GQ Chromo CV's now.
Where .?

I thought Nissan diff are nice .. and good but for real upgrade Cost vs benefit D60 set 35splines or 40 if you really want go bigger ..

Mire cheap R&P and all stuff ..

Aaa Corporate 14 bolts rear .. your best bet.
These guy's make them - www.highcountrycustoms.com.au

There is also a discussion on them here - http://www.outerlimits4x4.com/phpBB2/vi ... sc&start=0
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 159
Joined: Sun Apr 22, 2007 8:00 pm
Location: vic

Post by tjm_tj »

http://www.solidaxle.com/

check out this site for dana gear
wooders is a local dealer for them
back in a zook....
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

WICKED wrote:These guy's make them - www.highcountrycustoms.com.au

There is also a discussion on them here - http://www.outerlimits4x4.com/phpBB2/vi ... sc&start=0
thanks for the link .. ;)
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

just put GU diffs in it!! you will never break them. i met a guy who has a gq with gu diffs and his td42t has 600bazillion killerwatts at the back wheels and he has never broken a cv ;)
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

1MadEngineer wrote:just put GU diffs in it!! you will never break them. i met a guy who has a gq with gu diffs and his td42t has 600bazillion killerwatts at the back wheels and he has never broken a cv ;)
It is only 550bazillion killerwatts he redirected 50bazillion killerwatts to the AMP for the subbie mate
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests