Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

crankshaft pully/harmonic balancer repair

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

crankshaft pully/harmonic balancer repair

Post by cplux »

Hi all just wondering if anyone knows of anywhere, sydney preferable that may be able to urathane or otherwise a crankshaft pulley back together. the rubber ring between mine has failed.

the pulley is the same design as that found on 2y/3y/4y toyota motors, but has been custom made by a mate of mine and is a larger diameter to spin a supercharger quicker.

i would like to urethane it because it can sometimes creep forwards/backwards on the rubber and hence throw belts.

thanks craig
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

you don't really want urethane as that will remove what its their for ie vibration dampner. urethane will be to hard. you may be able to weld it up and bolt another dampner onto the front of the pulley.
Top
Posts: 381
Joined: Sun Jan 23, 2005 2:56 pm
Location: singleton

Post by nayto »

tweak'e wrote:you don't really want urethane as that will remove what its their for ie vibration dampner. urethane will be to hard. you may be able to weld it up and bolt another dampner onto the front of the pulley.
i know urethane is used on alot larger engines for the same purpose, not sure about cars though. Lovicks engineering i think theyre called did them
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

romac can recondition it http://www.romac.com.au/
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

thanks for the help guys will see how i got at one of those places
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest