Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drowned TD42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 9
Joined: Tue May 23, 2006 10:08 am
Location: Mornington Peninsula, Vic

Contact:
Contact pornmo

Drowned TD42

Post by pornmo »

I recently took my ute for a swim and now cant get motor to turn. Have removed glow plugs and injectors and blown water out of cylinders but still will not turn over with the starter or by towing. Water was only found in cylinders 2 & 4. Any ideas on what to do next?
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

rebuild it. if there isnt a hole i the block that is.:P

chances are your bottom end is stuffed. is there water i the oil?
does the motorstill have compression?
does it turn smoothly and freely when glow plugs are out?
have you cleaned and re primed injectors?
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

badger wrote:rebuild it. if there isnt a hole i the block that is.:P

chances are your bottom end is stuffed. is there water i the oil?
does the motorstill have compression?
does it turn smoothly and freely when glow plugs are out?
have you cleaned and re primed injectors?
I think it clearly states that the motor WILL not turn over either by starting or towing so my guess is that you have bent a few conrods and they are resting on the side of the bore down the bottom stopping it from turning, having said that they will normally turn a bit backwards then lock up again when you turn it the normal way.
Top
Posts: 9
Joined: Tue May 23, 2006 10:08 am
Location: Mornington Peninsula, Vic

Contact:
Contact pornmo

Post by pornmo »

Yeah that sounds like whats happening, was hoping for a happy ending but doesn't look like it. No movement at all backwards, is it possible that valves could be bent etc. or are conrods the only possibility.
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

have a look on ebay there is a whole running car going for 800 atm on the gold coast. i looked at it the other night be great for diffs and engine but the rest of its rooted
he wants about 3 tho i think (dreaming)
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

pornmo wrote:Yeah that sounds like whats happening, was hoping for a happy ending but doesn't look like it. No movement at all backwards, is it possible that valves could be bent etc. or are conrods the only possibility.
it will be your rods, diesels dont take well to being drowned.. theres a fully rebuilt TD42 on ebay $3000ish..
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests