Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine Oil

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 59
Joined: Fri Apr 20, 2007 3:11 pm
Location: Australia

Engine Oil

Post by Jam-Pony »

Is there already an oil advice thread or a wrap up on all the different type of oils etc?

I have looked and not found anything.

What i am trying to work out it which oil is best for a 4.6 rover set up for racing. I have been told to use a 0w - 40 fully synthetic Mobil oil but at $110 for 5L i want to make sure that his information is correct and that there isn't an alternative that still provides the performance I need.

Matt
Rangie, injected 4.6L, 35's, 8274, HID's, 6pt Cage, F & R Lockers...

What else turns you on? Drugs? Casual sex? Rough sex? Casual rough sex? I'm a docter, i need to know.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

A bit more information would be beneficial. What do you mean set up for racing? What type of racing?
The engine builder would be the best person to ask as they'll know what clearances the engine has and what oil will suit best.

I would have thought a zero weight oil would be too thin for a 4.6L, but if it built tight it may need it.

I certainly wouldn't be using mobil one fully synthetic. Especially if you're racing. I'd suggest using a cheaper oil and replacing it often. Your engine oil does a huge job and when you hammer your engine the oil takes all the punishment.
Mobil one synthetic is good for longterm but the shear expense makes puts it out of the question unless you've got dollars to burn.

Castrol edge oils are every bit as good but not fully synthetic. Your 4.6 will defintely not require a fully synthetic oil. And i'd suggest a 10 weight oil, 10w40 or 5w30 at the lowest.

Good luck, Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests