Found fuel dripping from the injector pump the other day, so today I cleaned it all up and noticed diesel dripping from what appears to be a rear seal.
It is in the centre plate at the back of the pump surrounded by the injector lines. It looks like a 13mm plug which is sitting in a larger diameter nut.
Does anybody know if the seals which are there can be easily replaced or is there more involved?
I've done a search and found a few threads regarding the top plate leaking and whats involved with that, and the usual cause, low sulper diesel, but nothing about the rear of the pump.
cheers, alex.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear seal leak -td42 inj pump
If its leaking from the 13mm bolt, there is a copper washer behind it. It the triangle plug, you will need to replace the plug, the have an o ring and a knife edge seal on the plug. You will also need the special tool to undo the plug. Are you sure its not coming from higher up?
Andy
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Who is online
Users browsing this forum: No registered users and 3 guests