Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Auto
Auto
I want to fit an auto to a 1300 by what i've read you can use a tri matic if this is correct does any one make an adaptor plate or do you just mod the bellhousing.
The only true wilderness is between a greenies ears
IN Australia we eat meat, drink beer & we speek f@#%&*^g english
IN Australia we eat meat, drink beer & we speek f@#%&*^g english
Give Dellows a call
You might be able to get a blank adaptor from them with just the trimatic holes drilled and drill the zook ones youself
Edit I got a 'spare' 1600 to 1300 gearbox adaptor from BenT
Might be able to use it in reverse, I'll have to dig it out and have look
You might be able to get a blank adaptor from them with just the trimatic holes drilled and drill the zook ones youself
Edit I got a 'spare' 1600 to 1300 gearbox adaptor from BenT
Might be able to use it in reverse, I'll have to dig it out and have look
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
non illegitimi carborundum!
[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
I can see no reason why by using a sierra/vitara adpater such as BenTzooks or Trail toughs you couldn't bolt a Vitara trimatic to a sierra motor. There might be some mucking around with the starter and flexplate, but it shoudl be possible.
Having said that, I don't think it would perform very well unless the 1.3 had more than stock HP.
Steve.
Having said that, I don't think it would perform very well unless the 1.3 had more than stock HP.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
a sierra gearbox to a vitara engine adaptor will work in reverse. the flex plate from a vitara bolts straight onto a sierra crankshaft.
i made my adaptor from a holden trimatic rear output housing, chopped and milled true then cut the back shaft suppert housing from a sierra 5 speed and got the milled true, inserted a flat plate between the 2 then tigged em up. that is the short of it, you do need to get it perfectly lined up.
i made my adaptor from a holden trimatic rear output housing, chopped and milled true then cut the back shaft suppert housing from a sierra 5 speed and got the milled true, inserted a flat plate between the 2 then tigged em up. that is the short of it, you do need to get it perfectly lined up.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Who is online
Users browsing this forum: No registered users and 10 guests