Regarding my 1993 80series GXL, Im wanting the factory front & rear diff lock instument claster dash lights to come on when I switch on my ARB front & rear diff lockers.
Has any one done this that could give me some hints on how I can achieve this. Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80Series Factory Diff Lock Dash Lights
Moderators: toaddog, Elmo, DUDELUX
80Series Factory Diff Lock Dash Lights
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Yep I have done that to my 93 GXL
ARB switches switch the active.
Toyota dash lights work via switching the earth.
You need 2 relays. One for each lock.
The ARB wiring turns the coils in the relays on
Then just run the earth via the relay's contacts and to the wiring loom that comes off the dash.
To find which wire comes off the dash you need to remove the dash and then follow the circuit board from the lock lights to the plugs and see which wire lines up with the board's line.
ARB switches switch the active.
Toyota dash lights work via switching the earth.
You need 2 relays. One for each lock.
The ARB wiring turns the coils in the relays on
Then just run the earth via the relay's contacts and to the wiring loom that comes off the dash.
To find which wire comes off the dash you need to remove the dash and then follow the circuit board from the lock lights to the plugs and see which wire lines up with the board's line.
Who is online
Users browsing this forum: No registered users and 2 guests