Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

td42 rebuild or conversion?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

td42 rebuild or conversion?

Post by joelt »

although i haven't had a comp test done yet, pretty sure i need a rebuild. but i'm wondering whether i should get it rebuilt, by a 2nd hand td42 or go complete conversion. what does everyone think? i'm not overly cashed up which is prob going to be a bit of an issue....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: td42 rebuild or conversion?

Post by bogged »

been done a few times

conversion : expensive.
Rebuild: if you get it done $7000 properly, head, cams etc (recently done by bloke in club, although he had 2 bent rods)
Used donk: they are around - probably the cheapest.
Ebay: $4000 for "rebuilt" engine.
Posts: 23
Joined: Wed Mar 14, 2007 9:03 am
Location: victoria

Post by trex »

Reco engines on ebay by East Coast 4wd $3300
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

trex wrote:Reco engines on ebay by East Coast 4wd $3300
yea saw that, but cant be much of a rebuild for that price.
Posts: 276
Joined: Sat Jul 16, 2005 1:41 pm
Location: Melton, VIC

td42 rebuild

Post by eighty8 »

Why do you think you need a rebuild?.
Does it blow smoke , have no power ?.
Posts: 3
Joined: Sun May 27, 2007 5:38 pm
Location: Darwin

Post by dopey »

Would be interested to know...

I have some similar desisions to make. Hopefully not rebuild, but at least turbo etc.
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

Post by joelt »

blowing smoke bad, white-ish blue smoke.....i also need the injector pump re-sealed. maybe, hopefully that is causing the smoke, but somehow i doubt it.....it's got enough power but it's also blowing blow-by smoke but only lightly.
Posts: 105
Joined: Sun Feb 13, 2005 9:22 am
Location: Bris, Qld

Post by Hutch »

joelt wrote:blowing smoke bad, white-ish blue smoke.....i also need the injector pump re-sealed. maybe, hopefully that is causing the smoke, but somehow i doubt it.....it's got enough power but it's also blowing blow-by smoke but only lightly.

How many K's on the motor? Could just need a re-ring kit to get another few years. Might be a cracked compression ring if ya getting blow-by vapor. Have you had head troubles/loss of coolant? If ya gonna open the head to re-ring may as well rebuild the head as well. Thats the prob you see... once you open her up its hard to know where to stop. Do a compression test to see if that shows up anything.

Good luck with it all and keep us informed.
Here is a test to find whether your mission on earth is finished: If you’re alive it isn’t.
- Richard Bach
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

bogged wrote:
trex wrote:Reco engines on ebay by East Coast 4wd $3300
yea saw that, but cant be much of a rebuild for that price.
Thats what i got, it doesn't include pump, injectors etc so thats extra

Done about 7'000km's so far & very happy so i say go for it!!!
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Big Red Toy wrote:
bogged wrote:
trex wrote:Reco engines on ebay by East Coast 4wd $3300
yea saw that, but cant be much of a rebuild for that price.
Thats what i got, it doesn't include pump, injectors etc so thats extra

Done about 7'000km's so far & very happy so i say go for it!!!
I remember Nicks parts came to more than 3k though...

glad its stayed together for u....
Posts: 105
Joined: Sun Feb 13, 2005 9:22 am
Location: Bris, Qld

Post by Hutch »

trex wrote:Reco engines on ebay by East Coast 4wd $3300
http://cgi.ebay.com.au/Nissan-Patrol-Fu ... dZViewItem
Exchange yours for an unknown?!!! :shock:
Here is a test to find whether your mission on earth is finished: If you’re alive it isn’t.
- Richard Bach
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

Post by joelt »

getting a compression test done next monday. see what they say and then i'll take it from there. injectors are fine, had them checked already, need a pump overhaul as well. man, it's so demoralising :cry:
Posts: 79
Joined: Fri Dec 03, 2004 5:37 pm
Location: Sunshine Coast - QLD

Post by turbodave »

joelt wrote:getting a compression test done next monday. see what they say and then i'll take it from there. injectors are fine, had them checked already, need a pump overhaul as well. man, it's so demoralising :cry:
Know how you feel. I'm going through the same thing at the moment. Mine took in dust one weekend (got past the airfilter), then a little bit of water the next. Getting a comp test done next week to find out how bad it is. Still seems to drive alright, but it's just not the same.

How much would a second hand turbo intercooled TD42 from a GU go for? I'd imagine it would drop straight in.

Seen this one on eBay. $14 000!!!!!
http://cgi.ebay.com.au/NISSAN-TD42-PATR ... dZViewItem
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

turbodave wrote:
joelt wrote:getting a compression test done next monday. see what they say and then i'll take it from there. injectors are fine, had them checked already, need a pump overhaul as well. man, it's so demoralising :cry:
Know how you feel. I'm going through the same thing at the moment. Mine took in dust one weekend (got past the airfilter), then a little bit of water the next. Getting a comp test done next week to find out how bad it is. Still seems to drive alright, but it's just not the same.

How much would a second hand turbo intercooled TD42 from a GU go for? I'd imagine it would drop straight in.

Seen this one on eBay. $14 000!!!!!
http://cgi.ebay.com.au/NISSAN-TD42-PATR ... dZViewItem

i have picked a 2 gu complete engines now one was from here, i got it for $3800... the other was for $4200.. they can be had for cheap. failing that buy a rolled gu at auction.. cheap as...

cheers mark
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

[remember Nicks parts came to more than 3k though...

glad its stayed together for u....[/quote]

All up, my rebuild was just over 7K. Parts alone came to 5K using all Ni$$an bits. I did all the assembly work including replacing cylinder liners.

I had a shop do the cam bearings--very difficult to replace yourself, as you need a tool to ensure oil holes are lined up. Same shop ground crank and balanced--all up came to around $1800 i think.

Cylinder head overhaul came to 2K--this included replacing all the precomp chambers,valve seats,guides and seals and valves--i also had same shop replace gudgeon bushes and ream to size.

Nick
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

Post by joelt »

so got a comp test and all clear, appears to be related to the injector pump which needs to be rebuilt, which needed to be done anyways. so better than an engine rebuild!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests