Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HILUX 2.8L Turbo Diesel. (3L Motor)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 16
Joined: Sat Jun 19, 2004 12:40 pm
Location: Shellharbour, N.S.W.

HILUX 2.8L Turbo Diesel. (3L Motor)

Post by YSO81G »

Hi, my motor has just stripped the harmonic balancer off the crankshaft and theres no chance of machining a new keyway! So lookin at either rebuilding bottomend of what i've got, rebuild full motor, or buying another reco motor. is there other upgrade options say to a 3.0L Turbo Diesel 3L/T motor out of newer shape? Also, I live on the southcoast, south of sydney. Whatever you suggest, where would be the best place to be gettin reco motor from for quality of work and of course price? Hope ya can help. Cheers From Matt!
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

You can do following:

1. another 3L engine
2. A 5L engine, 3.0litre.
3. 1KZ, 3.0TD from hilux surf.

If you can, you best option is 1KZ. 130hp and bags of torque.

You could always go for the 5L and stick a turbo on later.

If your on a budget, 3L.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

just throw another crank in it. time for new bearings anyway ;) fairly common problem, loctite the pulley onto the crank so it doesn't happen again.

you could fit a 5L motor but the engine mounts differ, not sure about aircon etc.

the 1KZ is a major job.
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

tweak'e wrote:just throw another crank in it. time for new bearings anyway ;) fairly common problem, loctite the pulley onto the crank so it doesn't happen again.

you could fit a 5L motor but the engine mounts differ, not sure about aircon etc.

the 1KZ is a major job.
I thought 5L were same mountings??

1KZ is not that bad, just did my LJ70 a month or so back. More expensive, but well worth it.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests