Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Temp gauge Sensor

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 149
Joined: Thu Dec 01, 2005 8:43 pm
Location: Launceston, Tasmania

Temp gauge Sensor

Post by cookiesa »

Just a bit of info that might come in handy to someone else...

I had reason to need a new temp gauge sensor (I killed the old one). Trident (available Supercheap, Sprint etc) have one listed which retails for about $9... Ordered one in as Sprints didn't have one on the shelf. When it gets here it is a MUCH smaller temp sender than original. I ended up drilling and tapping a blank to take the new sensor. All works well and all up cost about $20 (including blanking cap, new drill bit and tap) Of course if you already have these then it would be even cheaper!

And don't believe the Bosch book for your power steer/AC belt... the one listed is way too short! Take your old one in! (1995)
94 Disco Tdi
Bar with Winch
Full Mesh Alloy Rack
Awning
2" Lift
Coolant Alarm, UHF
Dual Batteries
Snorkel
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

They also list the wrong belt for a F300 waterpump - my explanation is that they have taken Applause data and gone "its the same engine so...."

Quicker just to read the belt codes and buy on them,

A cheap solution for senders is goto you nearest self serve wrecker and screw out an Applause one - same and "in stock" ;)
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 149
Joined: Thu Dec 01, 2005 8:43 pm
Location: Launceston, Tasmania

Post by cookiesa »

Found out about the belt one too!

I'lll post the bosch one later when I look at the box!
94 Disco Tdi
Bar with Winch
Full Mesh Alloy Rack
Awning
2" Lift
Coolant Alarm, UHF
Dual Batteries
Snorkel
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests