Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Location????

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5
Joined: Sat Mar 17, 2007 8:51 am
Location: Newy

Diff Location????

Post by Butnuckle »

I have just changed from standard wheels and tyres to 15x7 with 31x10.5 and noticed both front and back diffs are sticking out 3/4 inch more on the drivers side than the passengers side. Just after possible explanations for this.
'87 LWB Zook Project
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

Did you do any suspension lift to fit these tyres???

Simon..
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Posts: 5
Joined: Sat Mar 17, 2007 8:51 am
Location: Newy

Post by Butnuckle »

I have only done 2inch body lift. Tyres fit under easy but tyres rub on full lock.
'87 LWB Zook Project
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

might be a silly question but were all rims the same back spacing?.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

That was what i was thinking rims could be offset! :?
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 5
Joined: Sat Mar 17, 2007 8:51 am
Location: Newy

Post by Butnuckle »

I have just measured rims and all are the same. I also noticed at the back (which is in the one spot all the time) the pass. side tyre is covered by flare and the drivers side only the tread is covered.(and I measured the flares and they are the same width)
'87 LWB Zook Project
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

post a pic so we can see whats going on
Top
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

Have you moved the car since you changed the wheels? Did you use a jack to lift up one side of the car then the other? If so maybe your bushe s are very soft or you have really flexy extended shackles and the chassis isn't sitting directly over the diffs, try moving the car a few meters if you havn't already. If you have already moved the car ignore all of the above.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

I have found that the diffs are rarely perfectly centered under a Sierra. My front left sits out of the guard more than the front right.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Butnuckle wrote:I have only done 2inch body lift. Tyres fit under easy but tyres rub on full lock.
Another stupid question but you did line the body back up properly when the blocks went in I have seen some put in on the piss mainly when using box section.

SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

How bad is the lean on your zook?
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

swap the rims over and see if still the same on other side.

that should work out if rims or chasiss
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

The Sierra body lean tends to make one side 'appear' to stick out more
The body lift may of added to the 'illusion'
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

fool_injected wrote:The Sierra body lean tends to make one side 'appear' to stick out more
The body lift may of added to the 'illusion'
x2
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

waxhead.. wrote:How bad is the lean on your zook?
lol whos isnt bad?
Top
Posts: 5
Joined: Sat Mar 17, 2007 8:51 am
Location: Newy

Post by Butnuckle »

Today i swapped rear wheels and it made no diff. Sam, the body lift was done sober (for a change) and the body is still square with the chassis. I did ntice a slight lean but I don't think that has anything to do with diff position. I took these pics and hope they are of some help. Thanx for all the ideas.
ImageImage
'87 LWB Zook Project
Top
Posts: 144
Joined: Wed Feb 25, 2004 7:55 pm
Location: Auckland, NZ

Post by BenT »

Butnuckle wrote:I did ntice a slight lean but I don't think that has anything to do with diff position.
If its on a lean it can make it seem like the diff is offset, when really it isn't

I'd measure the height from tyre to flare, to make sure it is level, and if not, just jack one side of the chassis till it is level and see if the tyres then look like they stick out the same amount each side.

Ben
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts - 1600 Adaptor kits - Vitara Power Steering adaptor kits - Disc brake kits - Heavy Duty Transfer case arms & more
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

BenT wrote:
Butnuckle wrote:I did ntice a slight lean but I don't think that has anything to do with diff position.
If its on a lean it can make it seem like the diff is offset, when really it isn't

I'd measure the height from tyre to flare, to make sure it is level, and if not, just jack one side of the chassis till it is level and see if the tyres then look like they stick out the same amount each side.

Ben
his is leaning to the left, not the right like normal.. did u put all the rubbers in with the blocks? whose bl kit did u use??
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

mine is doing the same but the opposite way ??????????
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

According to the Chassis specs there is a few mm of variance either plus or minus. This is normal. Measure ANY car closely enough and you will find differences. On a Zook, any measurement over 1000mm can be out +/- 4mm or more. Don't stress. If you are really worried you could always fit a pair of spacers(5-6mm) to one side to even it up.
Image
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

thats +-4mm from factory too - imagine what 20years of abuse does to the chassis as well!

i'd check the springs arent sagged on the passengers side (or if theyre new springs, the manufacturer may have stiffened up the drivers side to counter the zuk lean... my old springs were like this.
The worst thing about censorship is ███████.
Top
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Gee, here am I thinking it was just a factory thing. I dont recall ever seeing a Zuk that doesn't have this issue :D
LWB Vit, Trail Slayer
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

his is leaning on the wrong side though... should be the drivers side that leans cos of the engine torque + driver + fuel tank all on that side...
The worst thing about censorship is ███████.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest