Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Noise coming from the back

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Noise coming from the back

Post by camskizook »

Hi all

can anyobdy tell me how to distinguish if the noise coming from the back is a stuffed wheel bearing or a stuffed diff? Because after talking to my mechanic he thinks it may the diff and not a wheel bearing like i thought....
CAM
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

..

Post by hypo »

buy a lux :)
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

but then i would have to start replacing CVs...

:P
CAM
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Ok you will usually hear a stuffed wheelbearing all the time and it will usually make basicly the same noise at any speed but i stuffed diff will howl at different rates all the time and most of the time when you back of the throttle it will get real quiet or real loud.
Top
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

RUFF wrote:Ok you will usually hear a stuffed wheelbearing all the time and it will usually make basicly the same noise at any speed but i stuffed diff will howl at different rates all the time and most of the time when you back of the throttle it will get real quiet or real loud.


and a wheel bearing will change pitch if you corner hard.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yeah it will do that as well.
Top
Posts: 666
Joined: Mon Oct 28, 2002 6:56 pm
Location: Newcastle NSW

Post by camskizook »

Thanks ruff....it must be the wheel bearing then because it is the same noise all the time.

Cheers
CAM
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

If its still whinning in the back after this Let your missus sit in the front :roll:
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

you have to pull the axles to pull the centre out anyway so just pull the axles and if the wheel bearings are shot you dont need to go any further
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Dont forget to replace the seals , put athin layer of silastic on the seating surface before your push them in .
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 124 guests