Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cast iron dump pipe

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

cast iron dump pipe

Post by g60boy »

hey guys, just a quicky. a mate of mine wants me to weld up a hole (so he can get rid of some emision cr@p) in his t28 cast dump pipe, so does any think this will cause any long term damage to the dump pipe it self? oh and ill probably just mig it.
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

as long as it is clean on the inside n no metal shavings or slag laying in it you should be fine ;)
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: cast iron dump pipe

Post by Guy »

g60boy wrote:hey guys, just a quicky. a mate of mine wants me to weld up a hole (so he can get rid of some emision cr@p) in his t28 cast dump pipe, so does any think this will cause any long term damage to the dump pipe it self? oh and ill probably just mig it.
why not bolt a plate over it ?
and why dump the emissions "crap" ? On that side of the system it is not going to use any power
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Post by g60boy »

tna racing wrote:as long as it is clean on the inside n no metal shavings or slag laying in it you should be fine ;)
yeah its coming off to weld it, so it will be cleaned befor re-fitting ;) , i just cant think if it will create any stress in the casting.
why dump the emissions "crap" ?
its just causing problems at the moment, plus its a drift pig!.
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests