Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU Patrol Remote central locking
GU Patrol Remote central locking
Someone familiar with factory remote central locking on GU's. Have the poverty pack GU wagon DX ( as good as the others without the bells and Whistles). Got a hold of a Factory remote along with the remote sender unit that bolts to the right just above the clover box. It was off a 2002 ST mine is a 2000 DX.
After plugging it in to wire that was taped back onto harness went through the programing procedure only to find it unlocks/locks all doors except the drivers door. Why is this so???????
the procedure is sit in drivers seat and manually lock drivers door, then insert and withdraw key seven time in 10 seconds until power door lock unlocks the drivers door then turn key to
ACC and then lock door manually within 3 seconds, then hit any button on remote and the doors should unlock indicating the remote has been programed. Did all this several times and the outcome was all doors except the drivers door unlocks/locks with the remote.
Can anyone help!!!!!
Cheers David
After plugging it in to wire that was taped back onto harness went through the programing procedure only to find it unlocks/locks all doors except the drivers door. Why is this so???????
the procedure is sit in drivers seat and manually lock drivers door, then insert and withdraw key seven time in 10 seconds until power door lock unlocks the drivers door then turn key to
ACC and then lock door manually within 3 seconds, then hit any button on remote and the doors should unlock indicating the remote has been programed. Did all this several times and the outcome was all doors except the drivers door unlocks/locks with the remote.
Can anyone help!!!!!
Cheers David
Nissan Patrol GU, Wagon
Is there a motor thingy for the drivers door that activates (cant remember its name)? When I wanted an alarm fited to 626 they told me I needed anotehr sender for the drivers locking thingy.. maybe they were enlarging my rectum for money.. but worth asking.
pretend u want an alarm fitted, call a few places, they will say if it needs one or not...
pretend u want an alarm fitted, call a few places, they will say if it needs one or not...
Remote locking GU Patrol
So guys whats the fix????
When The drivers door is locked/unlocked with Key all door unlock/lock, so what sends signal from drivers door to other to open all of them?
Cheers David
When The drivers door is locked/unlocked with Key all door unlock/lock, so what sends signal from drivers door to other to open all of them?
Cheers David
Nissan Patrol GU, Wagon
Re: Remote locking GU Patrol
buy the actuator thingy and wire it in with the rest I would guess... not totally sure, just knew thats what the alarm fitters told me it neededmoddedgu wrote:So guys whats the fix????
The fix is, you need to install an actuator into the drivers door.
You can purchase them through jaycar electronics.
The actuator is a little motor that goes to and fro, (lock and unlock).
Not to sure on what wiring needs to be done as i had a new alarm and that controls the central locking for my DX.
You can purchase them through jaycar electronics.
The actuator is a little motor that goes to and fro, (lock and unlock).
Not to sure on what wiring needs to be done as i had a new alarm and that controls the central locking for my DX.
Who is online
Users browsing this forum: No registered users and 0 guests