Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80series
Moderators: toaddog, Elmo, DUDELUX
80series
Thinking of getting an 80 series with diesal 1hz motor with under 200000kms on it how much am i looking at paying for a decent one mechanically etc without it being showroom condition if u get my drift?
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Leviticus 18:12
[quote="DIESELDOG"] coil suspension sux[/quote]
care to qualify that statement with some facts?
I reckon both coils and leafs can be made to work really well but there's always more "work" involved getting leafs working really well - the more flex you get out of a leaf system, the more it becomes like a coil system, by adding more suspension linkages as the leafs get softer. how many coily vehicles have you seen converted to leafs? not many. how many coil coversions of leaf sprung vehicles? lots. if coils suck so much, why is this so?
care to qualify that statement with some facts?
I reckon both coils and leafs can be made to work really well but there's always more "work" involved getting leafs working really well - the more flex you get out of a leaf system, the more it becomes like a coil system, by adding more suspension linkages as the leafs get softer. how many coily vehicles have you seen converted to leafs? not many. how many coil coversions of leaf sprung vehicles? lots. if coils suck so much, why is this so?
Was talking dead stock 80 dx with barn doors diesal manual.
Hmm 60 seems to be doing alright again with locker in it might be time to wrk out the finances and make a booking with team special for a spring over
Hmm 60 seems to be doing alright again with locker in it might be time to wrk out the finances and make a booking with team special for a spring over
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Leviticus 18:12
no problem, go and buy all the hi steer bits from Snake, drop them off with the truck, then you don't have to pay for my time running around buying parts. prob got enough stuff lying around the the anti wrap bar.
do you want a knuckle rebuild kit with that?
new wheel bearings?
powder coated axles?
4.56's or 4.88's?
air lockers?
spacers?
38's?
hurry up or Carter might get in first! he wants a turbo at the same time too!
do you want a knuckle rebuild kit with that?
new wheel bearings?
powder coated axles?
4.56's or 4.88's?
air lockers?
spacers?
38's?
hurry up or Carter might get in first! he wants a turbo at the same time too!
Who is online
Users browsing this forum: No registered users and 0 guests