Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Radius arm spacers....where from VIC

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Radius arm spacers....where from VIC

Post by jtraf »

Well I got the JT2 on today and won't be doing any more lifting.....

Going to add the radius arms spacers for clearing the guards and will extend the bump stops to keep the tyres out of the body....

Where can you get the spacer kit around the Nunawading area and how much will it set me back roughly??
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Smithies Outback Gear
Cooper Crt Cranbourne
03 5995 4325
:rofl: :popcorn: :snipersmile:
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

marks adaptors 1-3 ventura place dandenong south 03 9702 7366, dont know how close they are to you but they will post the spacers n they look good too
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

are these just like 10 or 15mm spacers to fit on the front radius arms and slide the diff forward 10 or 15mm??
hands and mums dont count!!!
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

bj on roids wrote:are these just like 10 or 15mm spacers to fit on the front radius arms and slide the diff forward 10 or 15mm??
yes that is what I am talking about............
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Post by weeman »

Marks 4wd...

they supply many of the other 4wd outlets they just dont tell you where they get them from its the same as the Hawse fairleads too.
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 45
Joined: Wed Aug 08, 2007 7:59 pm
Location: Traralgon

Post by smee2u »

Does anybody think that by spacing the radius arms further forward, it will place a lot more load out on the ends of the radius arm bolts (threaded ends). This could potentially create a weak point under hard, heavy use.
I have held off spacing my arms forward until l could find more information on this.
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Came up with the idea around 6 years ago and started selling through BBM when they started up. I have sold and fitted more kits than I can remember and havnt had or heard of any probs.
Cheezy
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

got the Marks kit and fitted it in the weekend......

Strange thing is I now have a clunk sound but not all the time and from both side....

Went over all the bolts a couple days after fitting and the noise is that noticable that my wife noticed it and told me about it.

now I didn't replace the rubbers in the radius arms when I put the spacers in.

Will new radius arm rubbers fix the issue???

Don't know but what are they worth? scared to ring nissan cause everytime I call them they give prices that make you weak at the knee's.....for instance they wanted $98 for a auto filter alone....I got the thing serviced for $140 including oil and labour.....
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Could just be your springs re-seating as they no longer sit squarely on the diff. Mine sometimes clunk when I turn full lock at slow speeds but it's nothing to worry about.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

how much was the spacer from marks?
hands and mums dont count!!!
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

The kit was $65 from Marks......

And yes the noise is the springs.....they do sit a little funny now and click when they seat as you drive along but seeing as though it is a non-issue sound I will learn to tune it out.

James
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

If anyone wants one of these kits I have an unopened one that I am not going to use (cos I am using drop boxes), you can have it for $50 delievered anywhere in Aus.
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Anyone got a picture of one of these badboys? I've been a bit curious, but i'm buggered if i'm paying $65 for a couple of washers or bush.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

it will consist of two spacers, of whatever length, and I would suggest two spacers of the same length to go over the threaded ends of the radius arms, to allow the same pressure on the bush....
hands and mums dont count!!!
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

if you dont have the spacer on the thread it eats out bushes faster than a 17 year old at an all girls dorm.

drop boxes also space the arm forward.
turbos are nice but i'd rather be blown
Top
Posts: 4
Joined: Fri Aug 17, 2007 10:54 am
Location: Kenthurst

arm spacers

Post by RUFFDONK »

i have installed marks 4wd adaptors 10mm arm spacers to my GQ to house larger tyres and havent had a problem with them. theyre easy to fit and effective. they are aroung $60 posted in australia and i recommend them
Top
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

Has anybody got a pic of these spacers, l would also like to see what they look like....

Cheers Chris
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

ORSM4B wrote:Has anybody got a pic of these spacers, l would also like to see what they look like....

Cheers Chris
not a great pic.

Image
Top
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

sootygu wrote:
ORSM4B wrote:Has anybody got a pic of these spacers, l would also like to see what they look like....

Cheers Chris
not a great pic.

Image
Where did you get them from and how much $$$$$

cheers chris.....and did you notice any difference in the way it drove...
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

0ne piece of tube 25mm od by 12mm long (goes on threaded end)
2 x 30mm washers 6mm thick with 25mm hole on front end BEHIND orig large washer, (or one 12mm thick washer etc)
Use ARB 5mm spring spacers under coils to stop any noise.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest