Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
toyota 4x4 ifs torsion bar adjustment
Moderators: toaddog, TWISTY, V8Patrol, Moderators
toyota 4x4 ifs torsion bar adjustment
can anyone tell me how to loosen the torsion bars so I can replace the control arm bushings
Depending on what year IFS, you need to jack up the front so the axles droop fully, place the jack under the front crossmember the unscrew the torsion arm adjusters that are located under the body near the B pillar. You might need to put a spanner on top of the adjuster if its an early model, just remember to count the turns so you can crank it back up again or you can go for a rim to fender measurement of @ 14-14.5".
John
John
Have a look at this link.
Its mostly about cranking the bars for more lift but some of the info is applicable.
http://www.off-road.com/toyota/tech/torsion/index.htm
Its mostly about cranking the bars for more lift but some of the info is applicable.
http://www.off-road.com/toyota/tech/torsion/index.htm
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Who is online
Users browsing this forum: No registered users and 93 guests