Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mcnamara 30 spline axles

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 44
Joined: Sun Jun 20, 2004 8:13 pm
Location: Perth W.A.

Mcnamara 30 spline axles

Post by quaddrive »

Hi,

Am part way throught the toy conversion and just recieved my rear axleshafts.
I machined the spindles to clear the standard 80 series axleshaft splines...
I get the McNamara axles and they are 20thou larger diameter in the splined area..... It is just the Mcnamara splines are complete whereas the tojo ones have the very tips machined off.
There is not a lot of meat left in the spindles where the flat section is for the lock washer... is this a problem in practice or do I have some unususally thin spindles?

Cheers in advance
When all else fails use full noise!!!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

The flats on mine were thin after machining.

have had no issues to date.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests