Hey fellas, just a quick couple questions:
I've got a set of 2" extended shackles, and want to run them with 2" lifted springs, apart from extended brake lines, what degree castor angle wedges will I require? Will the angle be different for front and rear?
Will I also need a dropped drag link? Is there anything else I need?
Also, will this allow me to run 33" tires?
It's a 92 Hilux.
Thanks,
Riley
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Another suspension question...
Moderators: toaddog, Elmo, DUDELUX
Another suspension question...
Some say he knows two facts about ducks...and they're both wrong.
you will need longer shockes to remember,yea u 33s will fit bt 12.5s will rub on the leafs when u turn, consider 2 in body lift to alow for more wheel travel, yea the wedges will be different but not shure about the angles i jus rewelded new spring perches on that were 50mm higher. and the bar that goes frm the diff to the chassie on the frnt will either ned to be removed or get an adjustable one i jus pissd mine off nd tryed it seems ok. been told when getting the brake lines go 4 braided to.
Does that cover it for you?
Does that cover it for you?
Blown ls1 GQ winch truck. and GU tow car / daily
Don't need to put castor wedges in the rear as it doesn't steer. Just make sure the tailshaft won't run out of slip on down travel but i'm sure it'll be right. Drop draglink would be good and if you can afford it redrill perches and get front shaft lenghtend and when you order the drop draglink make sure it's to suit it'll take if foward about 33/35mm mine was like this when i bought it and 35's just hit. Just piss the torque rod off after a while you'll end up going hi steer i reckon. Just have a chat to the boy's at superior mick know's his stuff
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 0 guests