Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2006 mk triton std height

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 31
Joined: Thu Aug 05, 2004 6:14 pm

2006 mk triton std height

Post by greybeard »

got a saggy front end on my new triton dual cab.
it's an early 2006 mk turbo diesel.
has anyone got a std ( ish ) similar model that they could measure from the centre of the front axle to the wheel arch for me?
and the same for the back end.
that way when i crank the torsion bars i can see if i'm in the ballpark.
thanks
Top
Posts: 583
Joined: Sat Sep 24, 2005 7:38 pm
Location: Central West-NSW

Post by Vineboy »

This may help a bit. My 98 MK has 500mm from the top of the manual hub to the bottom of the arch. I also have a ARB steel bar on it so it's down a bit.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Top
Posts: 31
Joined: Thu Aug 05, 2004 6:14 pm

Post by greybeard »

thanks
just checked similar on mine. ~420mm on the front and ~520mm on the rear. that's eith a ARB bar and winch on the front and empty on the back.
and about 5mm clearance on the bottom bump stop.
might be time to adjust the front end. if i can squeeze underneath it to adjust the torsion bars.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests