Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 rodeo with 3.0 intercooler

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

2.8 rodeo with 3.0 intercooler

Post by patrol man »

Hi there, a mate has a 2.8 and is looking at intercooling it, Has anyone here used a cooler off a 3.0 td, is there a better set up? cheers Phil. any advise on the water to air coolers on ebay?
Living the dream on the hill that floods
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

if he has a 4jb1 engine in it then the 3.1 L isuzu mu fit strait on (usually 1992 model onwards, pre1992 have 2.8 L engine and thats not intercooled). but good luck findin a mu with an intercooler on it thats wrecked .

i did it with my mates rodeo 1993 model made a little difference . worth it though
Email - flossamarosus@hotmail.com
Posts: 342
Joined: Mon Aug 01, 2005 4:18 pm
Location: Brisbane

Post by bluemq »

You'll need the bonnet scoop as well to aid with cool air flow.

And it will need the fuel adjusted accordingly to make use of the cooler intake to see any real power gains.

Without the fuel adjusted, it will be almost negliable difference (except maybe your exhaust temps will be lower).
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests