Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60series 3rd Gear Issues...

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

60series 3rd Gear Issues...

Post by vanzbrown »

Hey all... After reading about most of the gearbox issues in this forum, just wanted to post up something to get some specific help with my 60series (2H) gearbox...

3rd gear is becoming a pain to engage, when going from 2nd up into 3rd... Moving down from 4th back to 3rd doesnt seem to be a problem at the moment...

3rd will go in a bit easier if you really be delecate and slow, but try doing it any faster and it will just make a loud crunch before it goes in...

It is definatly worse when the vehicle has been running for a while, ie. Hot. I really notice it when im on offroad tracks and constantly changing from 2nd to third and so forth, but also around town... arrrgh...

Just wanting to know what the likely problem might be...

Thanks Guys.
Leeroy.
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

worn 3rd gear syncro
Top
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Post by vanzbrown »

Beautiful Work. :armsup:
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

if it's worse when hot maybe try a hevier oil or moreys
Top
Posts: 65
Joined: Sun Sep 16, 2007 8:39 pm
Location: Adelaide

Post by PeterInSa »

I would try Nulon Oil additive in your gearbox, but would also check your clutch adjustment as you would expect gear changes would be easier when hot.
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

PeterInSa wrote:I would try Nulon Oil additive in your gearbox, but would also check your clutch adjustment as you would expect gear changes would be easier when hot.
how do you adjust the clutch?
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

You can adjust the screw in the pedal .. but the fork movement coul be the same ..

If your MClutch and slave are working ok ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 65
Joined: Sun Sep 16, 2007 8:39 pm
Location: Adelaide

Post by PeterInSa »

seaeagle, vanzbrown.
I suspect that it is a syncro problem, but re the Clutch adjustment, if the change is easier when cold, harder when it heats up, it may be the Clutch release free travel, the heat could cause a bit of expansion giving excessive release lever free travel causeing insufficient clutch release making it hard to change gear. Its worth a check.

I would still try the Nulon.

Then again a cousin of mine never had driven a 4wd ,bought a Troopie (94) complained about gear changes had all sorts of checks done, turned out he expected gear changes to be as easy as a car not like the Truck he had purchased. Not for one moment suggesting thats you vanzbrown, but its a good story for a laugh.

Peter
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

with the engine off, when i press in the pedal i gat a click sound.... my ears arnt big enough to hear where its coming from...kids to small to press it and the missus isnt alound in it....lol
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests