wanting specs on the feroza rear and front diff heads ie sizes of gears as well as splines etc and the same for the rocky f70-75
im wanting this info as im goin to have a look round at other vehicle diffs to see if any match up for diff locks
cheers
please no high jacking of this thread i will inform everyone of what i find all in due time.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
info on diffs needed
Moderator: Tiny
info on diffs needed
dont follow its going to hurt
Been there - tried that, changed whole axle.
Front spline a major problem - couldn't find anyone with a broach to do the job or a gear from another make/model that was suitable.
Wish you luck - if you manage to lock a Feroza front, I will be the first order you get - and I am VERY serious.
Front spline a major problem - couldn't find anyone with a broach to do the job or a gear from another make/model that was suitable.
Wish you luck - if you manage to lock a Feroza front, I will be the first order you get - and I am VERY serious.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
How do you plan to handle the ratio issue, change front and rear ?
Your going to hurt the already too high transfer situation even more if you go below the 5.285:1 ratio already fitted.
Thats why I went Toyota, could match front ratio, and If I want to change stuf even more down the track there are higher ratios available.
Your going to hurt the already too high transfer situation even more if you go below the 5.285:1 ratio already fitted.
Thats why I went Toyota, could match front ratio, and If I want to change stuf even more down the track there are higher ratios available.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
i would most probably change both when i do it. im toying with the idea of getting a wreaked f300 in the next year or so and a wreaked hilux or other Ifs sprung vehicle and figureing out how hard it will be to swap whole diff, hub and arms etc over into the feroza. which then would leave more options for rear diffs and ratios. this wont be happening untill i get the dollars to do it lol at uni so funds for experimenting at this stage are tight
dont follow its going to hurt
IMO you need to look at the whole package, diffs, transfer/gearbox, wheels,
suspension and engine.
Without an overall approach, you will move from one issue to another. What you are proposing is a lot of work and $$ - having done it I know.
suspension and engine.
Without an overall approach, you will move from one issue to another. What you are proposing is a lot of work and $$ - having done it I know.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
There have been a couple of guys that have swapped the Hilux IFS front diff into a Vitara along with rear diff. Something similar maybe possible.
http://www.pirate4x4.com/forum/showthread.php?t=318480
http://www.zukiworld.com/forum/index.php?topic=8896.0
http://www.pirate4x4.com/forum/showthread.php?t=318480
http://www.zukiworld.com/forum/index.php?topic=8896.0
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Who is online
Users browsing this forum: No registered users and 2 guests