I am currently getting very poor fuel economy with a return of around 30l per 100 just normal driving.
I have a vp v8/t700 install and was just after things to try to get better economy.
injectors have been checked and are fine, i has a chip and will be getting a 218 crane cam installed to increase the torque curve.
If anyone has had one and gets good fuel economy i would love to hear
thanks AC
For those wanting to know more about the tracks at Toolangi I will endeavour to catch up with my mate who grades the tracks and find out what is happening. There has been some discussion about the sugarloaf pipeline as well whch will go statingth down the glenburb track. i have seen some of the drawings and it appears to go closer to the hwy, but I would expect that the earthworks will use the track as well.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
anyone running injected 5.0 in gq?
Provided the o2 sensor is Ok it will be the tune, I've found most off the shelf chips to be average at best. I do all my tuning real time, that allows me ot get the fuel trims correct and to decide where to put it into closed loop and most importantly what timing I can run with the fuel being used.
You should be closer to 20l per 100 if driving sensibly.
Joel
You should be closer to 20l per 100 if driving sensibly.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Who is online
Users browsing this forum: No registered users and 3 guests