Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g16B & 4sp Auto/J20a & 4spdAuto Same Bolts???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

g16B & 4sp Auto/J20a & 4spdAuto Same Bolts???

Post by Remydog05 »

Ive done a heap of measuring and reading on different threads etc.

Can anyone confirm this?

From what I can tell the G16B & Auto combination is the same size auto box and bolt paterns than the J20A & Auto.

There fore if a Conversion was done with a G16b and Vit 4spd auto then later on you could take this out and bolt in the J20A and its 4spd auto.

The only difference is the size (length) of the J20A) and the engine mount bolt paterns on the block of the J20A.

???? Whatdayareckon???
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

From what I have heard the manuals from the G series have the same bolt pattern as the J20 and J23 so I ASSUME the autos would interchange.

Cannot confirm anything though.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests