Hi Guys,
Just wanted to know how to fit a Suzuki Swift Gti 94 seats into a Sierra 90 WT. I have seen this done before but not really look at it that much. I'm fitting for a friends Sierra tomorrow. And also, does any1 know if i can fit a VW Golft GTi Recaro seats into a Sierra? I found some good Recao factory seats from a GOLF (dunno wat year) that i wanted to fit into my own Sierra 91 WT. Will it bolton strait to the factory rails?? I also wanted to ask i end up using the fasctory rails, is there any ways i can modify or get someone to weld something where the seats bolts into. I think at the moment the seats are attached by 10mm bolt on the floor. Is this strong enough or can i modify it to accept bigger bolts? (will be approved by an engineer?) Thanks advance for the help and sorry for the all the questions.
suki91
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting Swift Gti Seats into Sierra
Fitting Swift Gti Seats into Sierra
Last edited by suki91 on Fri Nov 09, 2007 9:19 pm, edited 1 time in total.
I've got mk1 (1988) swift gti seats in my 1989 sierra and they almost bolt straight up. If you have the seats handy already just trial fit and see what needs doing. I think at most to fit mk1 seats you need to drill maybe one or 2 holes and fit a new bolt but it's pretty straight forward. I'm not sure about mk2/3 seats though as they are different.
Who is online
Users browsing this forum: No registered users and 0 guests