Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear left window wants to keep going up.
Rear left window wants to keep going up.
Hi guys l have electric windows and it seems that the rear left window wants to keep going up and makes a racket when at the top.
Does anybody know why it is doing this or how to fix this?????
Cheers Chris
Does anybody know why it is doing this or how to fix this?????
Cheers Chris
l am not sure on idividual relays either.its aford not a nissan wrote:sounds like a sticky relay but i didnt think they had seperate relays for each window , then again i havnt looked for any in mine
does your drivers window go up by itself or is automatic when you push the button right down
Yeah have auto up and down on drivers window.
All the other windows stop at the top even with my finger still on the up botton execpt for the rear left window, gets to the top and keeps bangin away like it jumps a few teeth on the winder...
there are no seperate relays for each window.. its all controlled by the black box in the drivers door.
my drivers door does the clunking thing (which is the worm drive on the motor slipping over the gear) because the window mechanisim is shagged and stiff, and this seems to confuse the black box occasionally. (dont let it keep doing the clunking thing as it gets worse untill the gears are stuffed)
make sure the window is free, and actually fully reaches the top of its travel (have somebody push it up while you operate the switch)
if i'm reading you right the winding mechanisim (thing with arm that pushes window up) and/or rubber seal is stuffed. also is the window surround damaged? as if it is bent it will also make the window stiff.
my drivers door does the clunking thing (which is the worm drive on the motor slipping over the gear) because the window mechanisim is shagged and stiff, and this seems to confuse the black box occasionally. (dont let it keep doing the clunking thing as it gets worse untill the gears are stuffed)
make sure the window is free, and actually fully reaches the top of its travel (have somebody push it up while you operate the switch)
if i'm reading you right the winding mechanisim (thing with arm that pushes window up) and/or rubber seal is stuffed. also is the window surround damaged? as if it is bent it will also make the window stiff.
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
SurfChris wrote:Sorry it's a GQ wagon and it seems the wiring and seals are fine will check the teeth on the weekend......
thought it was a patrol,
best to make sure...
let us know how you go when u check it out

my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 3 guests