Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42 inline (not rotary) injector-pump fuelling screw

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 33
Joined: Sat May 12, 2007 6:20 am
Location: South coast, UK.

TD42 inline (not rotary) injector-pump fuelling screw

Post by UKGQ »

G'day all.

I've got a ex-Cyprus high-roof LWB GQ here in the UK, which, just FYI, looks a lot like a Safari, except it's a 12v, non-turbo car, with none of the Safari toys.

Whilst it's much the same as a 'normal' GQ in most regards, it's got a Zexel inline injector pump, not a rotary, so most of the info around doesn't apply.
I've googled, searched on here, and most other forums, with little joy.

Has anyone got any info on these inline pumps; specifically, which the fuelling screw is, and which way does what. I'm fairly sure (!) I'm right, but confirmation would be good!

Anything would be much appreciated :)

Regards,
Alex
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

I got a Cyprus model too. Standard roof but it has the Rotary pump. I didn`t know Zexel made an inline pump. I know it is all Bosch anyway.


Is your pump like the one in SD 33?

Alex
Top
Posts: 33
Joined: Sat May 12, 2007 6:20 am
Location: South coast, UK.

Post by UKGQ »

lexi wrote:I got a Cyprus model too. Standard roof but it has the Rotary pump. I didn`t know Zexel made an inline pump. I know it is all Bosch anyway.

Is your pump like the one in SD 33?

Alex
Odd.
The only car I know of ex-Cyprus has an inline too, but that's in the UK.

Yup, it's all Bosch, as you say, but I can't find much about them at all.

TBH I don't know what an SD33 pump looks like; I assume that's a Zexel inline, then?...

Alex.
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

Want to post a pic of the side and back of the pump and I will tell you.



Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Posts: 33
Joined: Sat May 12, 2007 6:20 am
Location: South coast, UK.

Post by UKGQ »

Dzltec wrote:Want to post a pic of the side and back of the pump and I will tell you.

Andy
Thanks Andy; much appreciated.

This is the side; I'll try to take some of the back tomorrow.
http://myweb.tiscali.co.uk/foxheavyindu ... CF0811.JPG

On the back of the pump, towards the middle of the car, towards the bottom of the pump itself is a screw with a lead-sealed anti-tamper cover; IMVHO, this is the fuelling screw?
The only other screw that's similar (ie apparently adjustable) is higher and towards the outside, and that looks like being idle speed?

Assuming I'm right about the fuelling screw, I assume clockwise will increase the fuelling?...

What is the nut/screw next to the Zexel plate for, JOOI?

Many thanks.
Alex
Top
Posts: 335
Joined: Mon Oct 10, 2005 10:33 pm
Location: newcastle

Post by xenith »

can't help with fuel screw but this pump comes out on fork trucks with same motor :cool:
it will go or it will blow
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

FYI, Zexel are a company which make alot of products under license from other manufacturers, such as Calsonic, Bosch etc

I'd be suprised if any of the rotary pumps are actually made by Bosch themselves.

AFAIK the inline pumps are diesel-kiki products?
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Yes that is prolly true Yom. I think Bosch just bought em all over. Bosch though are the World leaders in fuel injection as far as sales and clout are concerned.

That Pump looks similar to sd33. Mine is the Rotary one. My truck was bought in Cyprus in 94 and brought over to UK as new. Some say the inline pump is better?

Alex
Top
Posts: 33
Joined: Sat May 12, 2007 6:20 am
Location: South coast, UK.

Post by UKGQ »

lexi wrote:Some say the inline pump is better?
Alex
I imagine Dzltec will correct me if I'm wrong, but from what little I've read, inline pumps are (very broadly) more like pumps from small trucks, and can handle SVO a lot easier, for example.

Eg:
"Inline Diesel pumps are the Holy Grail for Vegetable oils use!"
from
http://www.freewebs.com/hcii/pumpidentification.htm

Not Nissans specifically, but rotary pumps in general seem less robust, certainly where SVO's concerned.

Alex.
(The one not in Scotland.)
(BTW, keep your eye on http://www.uknissan4x4.com - looks like we might be getting a UK Patrol forum :) )
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

UKGQ wrote:
lexi wrote:Some say the inline pump is better?
Alex
I imagine Dzltec will correct me if I'm wrong, but from what little I've read, inline pumps are (very broadly) more like pumps from small trucks, and can handle SVO a lot easier, for example.

Eg:
"Inline Diesel pumps are the Holy Grail for Vegetable oils use!"
from
http://www.freewebs.com/hcii/pumpidentification.htm

Not Nissans specifically, but rotary pumps in general seem less robust, certainly where SVO's concerned.

Alex.
(The one not in Scotland.)
(BTW, keep your eye on http://www.uknissan4x4.com - looks like we might be getting a UK Patrol forum :) )

If i could stuble across an inline pump for a td42 id be happy as a pig in mud/ Perfect for wvo conversions. SHHH
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 86 guests