Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MU/Rodeo Intercooler

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

MU/Rodeo Intercooler

Post by Yarno »

From: GoRodeoGo
To: Yarno
Posted: Mon Nov 17, 2003 8:35 pm
Subject: Re: Intercooler
G'day Yarno,
Thanks for your reply. I'm looking forward to any pictures you take. Did it make much difference to the engine performance? I see most of the aftermarket ones go from about 74Kw to around 90-95Kw so I'd imagine the Jackaroo one would be much the same.

Did you cut a hole in the bonnet too?

Thanks
-Stuart


Yep here are some pix of my cooler, I have not cut the hole yet but there was some increase in power noticed even without... also the MU 2.8 engine is rated at 81kw standard unlike the Rodeo!![/quote]
Go hard or go home!!!
MU build here
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Post by Yarno »

And
Go hard or go home!!!
MU build here
Posts: 5
Joined: Thu Oct 09, 2003 10:23 pm

Post by GoRodeoGo »

Good Stuff Yarno,
Looks pretty good. I see where you had to rotate the inlet housing.

Thanks for posting them.

-Stuart
Posts: 10
Joined: Thu May 15, 2003 9:33 pm

Post by TFS55 »

i put an intercooler also in my pick-up with the same engine. difference is i put it at the back of the grille. did not notice much improvement though. the only advantage i guess that it performs well when the weather is hot just like when its cold. i guess i have to up the boost a bit due to the long tubings to compensate.
Posts: 5
Joined: Thu Oct 09, 2003 10:23 pm

Post by GoRodeoGo »

Yarno,
Where did you get the intercooler from?
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Post by Yarno »

I think the place where I got it from was called

http://www.findapart.com.au/home.html

it was $200 but if you want you can get them from

http://www.4x4isuzu.com/

There about $400 and they come with all brackets and bonnet scoop which I didn't get....

Cheers Yarno.
Go hard or go home!!!
MU build here
Posts: 5
Joined: Thu Oct 09, 2003 10:23 pm

Post by GoRodeoGo »

Thanks again Yarno :cool:
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Re: MU/Rodeo Intercooler

Post by Vulcanised »

.......also the MU 2.8 engine is rated at 81kw standard unlike the Rodeo!!


You will find that the Rodeo can also generate around 81kw with a small adjustment to the injector pump, most dyno tunes can do this in a very short period of time. :)
There is no "I" in Team, but there are 5 in Individual Brilliance
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests