Newfields axle/cv from states. Anyone used them?

Post by **dank** » Wed Nov 07, 2007 9:52 am

Looking to beef up front drive train for the 34s. Trail tough are outrageous on shipping the double toughs at 260 us via UPS. Newfields from roadlessgear.com are same price but only 115 us shipping... Any real difference in strength? Newfields are a full 4340 cromoly whereas the current DTs are not but they will be available from jan08. I can't wait that long! Any opinions welcome.

Post by **tanshi** » Wed Nov 07, 2007 10:03 am

see what lowrange offroad have? Im getting two sets of gears, two rebuild kits, a pair of shock mounts, and a lux high steer kit sent over for $360 shipping

Post by **dank** » Wed Nov 07, 2007 10:15 am

Yeah i'm waiting on a reply re shipping from sean for the DTs. Waiting....

Post by **cut 4B** » Wed Nov 07, 2007 10:26 am

MY BROTHER IN LAW IS LIVING OVER IN LA IM GETTIN A SET OF NEWFIELDS SENT OVER SOON I CAN FIND OUT HOW MUCH FOR TO SETS HE SENDS THEM AS USED PARTS SO THERE CHEAPER

Post by **bazooked** » Wed Nov 07, 2007 11:41 am

cut 4B wrote:MY BROTHER IN LAW IS LIVING OVER IN LA IM GETTIN A SET OF NEWFIELDS SENT OVER SOON I CAN FIND OUT HOW MUCH FOR TO SETS HE SENDS THEM AS USED PARTS SO THERE CHEAPER

get me a price on sum walker evans 17" beadlock wheels

Post by **dank** » Wed Nov 07, 2007 5:02 pm

I'm pretty happy with 115US postage as its to my door. If you want cut4b look into it and see what your brother can do to post them to Bentleigh East Victoria, 3165. THat would be great.

cheers

Post by **cut 4B** » Thu Nov 08, 2007 11:27 am

i think the newfields are a better buy they come with a life tim warrenty i think

Post by **Gwagensteve** » Thu Nov 08, 2007 6:33 pm

I like Doubletoughs, but I'm happy to admit those newfields look pretty good, and maybe better value.

A point about the warranty though - It's for one birfield only, not the axles, and only once.

from what I can see, the doubletough bell looks stronger (more meat, maybe better designed) but I agree that the newfield bell being Chromo might well help. DT's have CTM inner axles though

If you can't get Doubletoughs for months I wouldn't hesitate to try the newfields.

Steve.

Post by **dank** » Thu Nov 08, 2007 7:06 pm

i did some research through pirate and it seems back in 2005 06 a lot of people running 34 and bigger were snapping the axles shafts...I'm unsure of if they fixed this problem...but I think due to cheaper shipping rates i'll be going for the newfields.

There was one thread which proved that the newfield cv was unbreakable even with CTM or 300M axles shafts...it got to 9000Nm and the axle shafts were snapping...lol...well my issues have always been the birfield so it looks promising for me!

Sean from Low Range Off Road has been fairly unreliable as of late...which is unusual as I have had fantastic dealings with him for everything else I have bought....ah well...hopefully he'll get back to me in the near future with a better shipping price for the DTs...

Post by **zookimal** » Fri Nov 09, 2007 12:02 am

dank wrote: Sean from Low Range Off Road has been fairly unreliable as of late...which is unusual as I have had fantastic dealings with him for everything else I have bought....ah well...hopefully he'll get back to me in the near future with a better shipping price for the DTs...

I spoke to him not long ago and he's been flat out. I know what you mean though, it sometimes take a bit to get hold of him.

Post by **dank** » Fri Nov 09, 2007 8:46 am

zookimal wrote:
dank wrote: Sean from Low Range Off Road has been fairly unreliable as of late...which is unusual as I have had fantastic dealings with him for everything else I have bought....ah well...hopefully he'll get back to me in the near future with a better shipping price for the DTs...
I spoke to him not long ago and he's been flat out. I know what you mean though, it sometimes take a bit to get hold of him.

Yeah he's always busy that guy...he's missed out on my busniess this time...just ordered the newfields from www.roadlessgear.com superfast responses to emails and a no fuss approach...should be here in 6-10 days

Post by **mistaboz** » Fri Nov 09, 2007 10:47 am

http://www.cvunlimited.com/NEWFIELD/suzuki.htm

Suppliers for Newfiel axles.
Was browsing the net today for some information and came across this.

Cheers Paul.

Post by **lay80n** » Fri Nov 09, 2007 11:09 am

dank wrote:i did some research through pirate and it seems back in 2005 06 a lot of people running 34 and bigger were snapping the axles shafts...I'm unsure of if they fixed this problem...but I think due to cheaper shipping rates i'll be going for the newfields.

There was one thread which proved that the newfield cv was unbreakable even with CTM or 300M axles shafts...it got to 9000Nm and the axle shafts were snapping...lol...well my issues have always been the birfield so it looks promising for me!

Sean from Low Range Off Road has been fairly unreliable as of late...which is unusual as I have had fantastic dealings with him for everything else I have bought....ah well...hopefully he'll get back to me in the near future with a better shipping price for the DTs...

Slightly off topic, but remember when you beef up a drive train, the stress will just go to the next weakest link, hence why the axles were snapping with beef CV's. If you choose to run these, you may end up snapping more axle shafts. You may want to look into stronger shafts if this turns into an issue. It is possible for a snapped shaft to stuff the CV too when it goes. Dont get me wrong, im not saying dont go for the CV's at all, i can relate very well to how zook gear handles swampers and low gearing.

Layto....

Post by **dank** » Fri Nov 09, 2007 11:35 am

Thanks for the tip layto...

I relaise that somewhere along the line there will be a point weaker than the rest. Thats why i've tried to share out the load on components by going 4.9 tranny, upgraded transfer mounts, 4.57 diff gears and stronger cvs/axles...hopefully with that combination driveshafts, unis, mounts will all share out the load, rather than one point taking everything....

Post by **ofr57** » Mon Nov 12, 2007 2:19 pm

on a side note ... i just discovered Spidertrax has prototype chromoly
front axles

http://www.izook.com/tech/samurai/drive ... taxles.htm

Post by **11_evl** » Mon Nov 12, 2007 6:56 pm

is it possible to buy JUST the CV, as im in the process of getting a hook up with super tuff shafts here in brisbane.
that CV UNLIMITED site listed shafts and cvs!!

Post by **saffrett** » Mon Nov 12, 2007 7:15 pm

http://www.rocky-road.com/zukdrive.html
maybe the warn hub fuse would be the answer to the weak point and go full floating rears and put them on the back as well problem sloved just get heaps of spares and ur set

Post by **BenT** » Mon Nov 12, 2007 8:13 pm

ofr57 wrote:on a side note ... i just discovered Spidertrax has prototype chromoly
front axles

http://www.izook.com/tech/samurai/drive ... taxles.htm

Now that sounds much better.... I can confirm that the early Newfield shafts were crap.
Here's a pic of one we broke in a winch challenge zuk with a 1600 on 32" Simex's.

After getting new shafts made, just like the ones spidertrax seem to be making now, they've been bullet proof ever since.

Ben

Post by **Gwagensteve** » Mon Nov 12, 2007 8:46 pm

saffrett wrote:http://www.rocky-road.com/zukdrive.html
maybe the warn hub fuse would be the answer to the weak point and go full floating rears and put them on the back as well problem sloved just get heaps of spares and ur set

Hub fuses are IMHO, a dumb idea. They are a very vague thing to work with- if you make the weak enough that they break before a CV with the steering turned, they will break frequently with the steering straight ahead.

In the rear they'd last about 5 mintues.

I'll be running hubs in the rear and fully expect to break a full strength Sierra front hub without too much problem.

Steve.

Post by **Gwagensteve** » Mon Nov 12, 2007 8:47 pm

BenT- might be why TT has gone to CTM chromo inners.

The look the goods, hope they take the abuse.

Steve.

Post by **TessaL** » Wed Nov 14, 2007 5:15 am

BenT wrote: .... I can confirm that the early Newfield shafts were crap.
Here's a pic of one we broke in a winch challenge zuk with a 1600 on 32" Simex's.

I can confirm that, exacly how mine cracked during Ladoga Trophy 2006 in Russia. And it was in mud

I made new ones in local axle shop but no real life experimence from them yet.

Outer Limits 4x4 Board

Newfields axle/cv from states. Anyone used them?

Newfields axle/cv from states. Anyone used them?

Who is online