Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
###UPDATE### GROUP BUY: Disco / Rangie / Defender Flares
Moderator: Micka
G'day guys.
Still haven't fitted them yet
Gone back to full time uni so it has taken precedence over most things whilst trying to earn a $.
Finish this week, will be on the truck within the next month for sure now I have some time.
Who's interested in them???
I can organise another buy if there is more support....
PM Me.
Dave.
Still haven't fitted them yet
Gone back to full time uni so it has taken precedence over most things whilst trying to earn a $.
Finish this week, will be on the truck within the next month for sure now I have some time.
Who's interested in them???
I can organise another buy if there is more support....
PM Me.
Dave.
Land Rover Discovery - GQ conversion underway
I got some direct on a once off deal via someone in the uk and am pretty happy with them too! Didnt end up using the piping that comes with them and some of the screws were too long but otherwise they are very good and heaps better than the fibreglass ones. Incidentally I found them on another site (Famous Four) I think it was for less than Paddock had them for...
Anyway I recommend them...
Anyway I recommend them...
Take me to the Bush!
http://www.innovation4x4.co.uk/arches.htm
Looking at ordering these flares in the next few weeks for my rangie
just checking that there are no one selling them in aust yet?
still keen on a group buy if anyone is keen
Camo
Looking at ordering these flares in the next few weeks for my rangie
just checking that there are no one selling them in aust yet?
still keen on a group buy if anyone is keen
Camo
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Let me know if anybody is intrested perhaps we can do a group buy on this one, I speak to the this bloke often on one of the American forums
Rangie Flares
http://www.lucky8llc.com/ImageUploads/warchesL10.jpg
Disco 1 and 2 flares
http://www.lucky8llc.com/ImageUploads/P ... mage01.JPG
http://www.lucky8llc.com/Index.asp
Rangie Flares
http://www.lucky8llc.com/ImageUploads/warchesL10.jpg
Disco 1 and 2 flares
http://www.lucky8llc.com/ImageUploads/P ... mage01.JPG
http://www.lucky8llc.com/Index.asp
hi v8 rangie, i was interested last time but wasn't sure if they were big enough to cover my already cut guards. I have LRA 2 door flares on mine, the arches come right up to the body line.
stikman, could you please post dimensions of yours? They look quite big so they could do the job.
I have just posted update pics of my build, you can see the size of flare and cut out easily.
Cheers
Steve
stikman, could you please post dimensions of yours? They look quite big so they could do the job.
I have just posted update pics of my build, you can see the size of flare and cut out easily.
Cheers
Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Hi Steve,schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.
Cheers
Steve
Let me know what dimensions you are after and i will take some measurements.
Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.
Regards
Philippe
Just to clarify the "flexy flares" with or without the wire inserts are a rubber flare and bend to whatever radius of the wheel arch you like.
The "Flexible Fibreglass look Flares" imported from the UK through innov 4x4 or Paddock are a high density resilient plastic in a pre-moulded shape similar to the LRA fibreglass flares and are a fixed size.
They come in either 50 or 75mm widths off the body.
Because they have some give they will go on either rangie or disco (and probably D2 but an email to the guys at Paddock or Innov wouldnt go astray.)
The "Flexible Fibreglass look Flares" imported from the UK through innov 4x4 or Paddock are a high density resilient plastic in a pre-moulded shape similar to the LRA fibreglass flares and are a fixed size.
They come in either 50 or 75mm widths off the body.
Because they have some give they will go on either rangie or disco (and probably D2 but an email to the guys at Paddock or Innov wouldnt go astray.)
Take me to the Bush!
Hi Philippe,stikman wrote:Hi Steve,schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.
Cheers
Steve
Let me know what dimensions you are after and i will take some measurements.
Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.
Regards
Philippe
Could you tell me the width of the opening at both the top and botom of the flare, the total width of the flare top and bottom and the height of the opening including total height of the flare.
By the way what is the depth, is it over 50mm?
Thanks
Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Just to clarify, i am after the flexible flares, Product code: 64-FWA from the innovation web site.
stikman, can you clarify that these are the type you have fitted, and not the GRP versions.
I don't want the clarke rubber look.....
Thanks
Steve
stikman, can you clarify that these are the type you have fitted, and not the GRP versions.
I don't want the clarke rubber look.....
Thanks
Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Sorry for the delay. Some rough measurements.schuler wrote:Hi Philippe,stikman wrote:Hi Steve,schuler wrote:
stikman, could you please post dimensions of yours? They look quite big so they could do the job.
Cheers
Steve
Let me know what dimensions you are after and i will take some measurements.
Also, from what i know the Flexi Flares are one size only (not the 50or75).The 50mm or 75mm ones are fibreglass.
Regards
Philippe
Could you tell me the width of the opening at both the top and botom of the flare, the total width of the flare top and bottom and the height of the opening including total height of the flare.
By the way what is the depth, is it over 50mm?
Thanks
Steve
Front - Height at front ~150 opening + ~80 flare, Height at rear ~350 opening + ~80 flare, Width a top ~550 opening + ~80 flare, width at height of front low point ~710 opening + ~80 flare.
Back - Height ~350 opening + ~80 flare, Width a top ~540 opening + ~80 flare, width at middle ~760 opening + ~80 flare, width at bottom ~880 opening + ~80 flare.
Let me know if this is helpful or confusing
Flares sit 50 from the body, and looking at both Innovation and Paddocks i cannot see a 75mm version available in the Flexi Arche (Flare), 75mm only available in the GRP (fibreglass).
These are the ones i purchased (PM788) http://www.paddockspares.com/pp/OFF_ROA ... _of_4.html which i beleive are the same as 64-FWA from http://www.innovation4x4.co.uk/arches.htm
Hope this helps everyone.
[/quote]Sorry for the delay. Some rough measurements.
Front - Height at front ~150 opening + ~80 flare, Height at rear ~350 opening + ~80 flare, Width a top ~550 opening + ~80 flare, width at height of front low point ~710 opening + ~80 flare.
Back - Height ~350 opening + ~80 flare, Width a top ~540 opening + ~80 flare, width at middle ~760 opening + ~80 flare, width at bottom ~880 opening + ~80 flare.
Let me know if this is helpful or confusing
Flares sit 50 from the body, and looking at both Innovation and Paddocks i cannot see a 75mm version available in the Flexi Arche (Flare), 75mm only available in the GRP (fibreglass).
These are the ones i purchased (PM788) http://www.paddockspares.com/pp/OFF_ROA ... _of_4.html which i beleive are the same as 64-FWA from http://www.innovation4x4.co.uk/arches.htm
Hope this helps everyone.[/quote]
Hi stikman,
thank you very much for taking the time to measure them, i'll check my measurements out over the weekend and see how we go.
Thanks once again for the effort
Front - Height at front ~150 opening + ~80 flare, Height at rear ~350 opening + ~80 flare, Width a top ~550 opening + ~80 flare, width at height of front low point ~710 opening + ~80 flare.
Back - Height ~350 opening + ~80 flare, Width a top ~540 opening + ~80 flare, width at middle ~760 opening + ~80 flare, width at bottom ~880 opening + ~80 flare.
Let me know if this is helpful or confusing
Flares sit 50 from the body, and looking at both Innovation and Paddocks i cannot see a 75mm version available in the Flexi Arche (Flare), 75mm only available in the GRP (fibreglass).
These are the ones i purchased (PM788) http://www.paddockspares.com/pp/OFF_ROA ... _of_4.html which i beleive are the same as 64-FWA from http://www.innovation4x4.co.uk/arches.htm
Hope this helps everyone.[/quote]
Hi stikman,
thank you very much for taking the time to measure them, i'll check my measurements out over the weekend and see how we go.
Thanks once again for the effort
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
I'm definitely interested in a set of 50mm to suit a 2 door rangie once a final price is confirmed. Who's doing the buy ?? how many definite's do we have ??
Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes.
Who is online
Users browsing this forum: No registered users and 1 guest