Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Blown Motor RX28Td GQ advice

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5
Joined: Mon Sep 11, 2006 7:22 am
Location: Culcairn

Blown Motor RX28Td GQ advice

Post by wono4x4 »

I have just cookedthe motor in my GQ RX2.8T
Any body got any advice on Repair/replacment/alternative motor that does not cost arm and a leg?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Blown Motor RX28Td GQ advice

Post by bogged »

cheapest will be another 2.8..should be cheap as chips at wrecker.

have you pulled your donk down to see what damage?
Top
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

Post by joelt »

i don't know, but i'll buy your diff ratios off ya when you start parting it out.....
88 td42 gq. 2" body & 3" OME, 36" beadlocked 'pedes, ARB winch bar mod'd for body lift, rear locker.....
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

hey

Post by stormpatrol »

just bight the bullet mate 4.2 CONVERSION took me 6 days and dont worry about 2.8td any more the old 4.2 is a very robust motor will go for yonks and then save for a TURBO pm me for more info :D
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Re: hey

Post by Daisy »

stormpatrol wrote:just bight the bullet mate 4.2 CONVERSION took me 6 days and dont worry about 2.8td any more the old 4.2 is a very robust motor will go for yonks and then save for a TURBO pm me for more info :D
What he said...

just need td42, gearbox and driveshafts, and the rear centre yoke and you're set.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Blown Motor RX28Td GQ advice

Post by bogged »

wono4x4 wrote:I have just cookedthe motor in my GQ RX2.8T
Any body got any advice on Repair/replacment/alternative motor that does not cost arm and a leg?
I agree with the others, but what do you consider and Arm and a leg??

You maybe better off buying a cheap GQ complete, they go for round $3000 for the whole car with rooted body etc, but somtimes the motor can be a gem.

but a budget will help
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 10 guests