Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lowering my lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

lowering my lux

Post by big lux »

ive just moved into a new house and got a 2 car garage so i can have a workshop BUT now my lux wont fit its to high. if i drop heaps of air out of the tires and pull off the tray it should fit but it sits around more than it drives sum times a few mnths will sitting for a month on flat tyres damage the rubber? by the way i run 35inch claws
Blown ls1 GQ winch truck. and GU tow car / daily
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

m

Post by sloshy »

Just put some 30's or 31's on it aired down
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

yea i can get a set of road tyres on rims for 200 but i dont realy wana have 2 chage the tyres everytime i go out. so does this mean it will damage my tyes?
Blown ls1 GQ winch truck. and GU tow car / daily
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

theyll only be flat on the bottom :lol: :roll:
turbos are nice but i'd rather be blown
Top
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

Post by stewie81 »

You Say >>
if i drop heaps of air out of the tires and pull off the tray it should fit
I would think it would be less trouble Changing tyres to smaller 30's or 31's than removing tray then airing down.. a good jack and Rattle gun have them changed in 5 mins . Just my View..

Stewie
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

if you wanna be cheap air em down then drive it in a put it on stands
[color=green]Vote Earth[/color]
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Is it the whole garage roof or just the doorway?
This is not legal advice.
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

park it outside with a tarp over it :D :armsup:





put smaller wheels on it when ya not off 4wding, like stewy said, 5 mins if ya got a rattle gun, 15 if ya dont. a jack under the middle of the dif will get both wheels off the ground, so thats less jacking needed
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Get a car port, at least make it a big wide one. If your a renter, then find another place!
I'm the sharpest tool in the shed!
Top
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

Give the house a 7" lift.

:)

We have lifted several sheds/ carports to accomodate vehicles.

:)
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Top
Posts: 34
Joined: Thu Oct 11, 2007 2:21 pm
Location: Albany, WA

Post by Taco-klng »

Just go to ya Local Shed Placce... and thell thems yo problem.... they Could probably Cut the Beam out above and lift it up... or something like that...

You could prob do it yourself.. Wouldnt reccommend it tho :P
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

jack hammer and wheel trenches
Top
Posts: 34
Joined: Thu Oct 11, 2007 2:21 pm
Location: Albany, WA

Post by Taco-klng »

Oh, Damn Ya, thats a Prime idea.. Ever if you just Jack hammer the First bit up!!

Neer the enterance and Angle it down so you have just enough room to clear the enterance.!!!

then just get a bit of a slurry mix of cement and smooth it of.


Still cheeper than New tyres lol
Top
Posts: 98
Joined: Sat Jun 23, 2007 1:53 am
Location: Glenbrook NSW

Post by BEN_R »

Mate ive got a set of old 29s you can have come get them

these one's
Image
1989 Nissan Patrol GQ, 4.2 Turbo Diesel, 4'' Spring Lift, 2'' Body Lift
[url]http://www.4wdmonthly.com.au/shed/index.php?id=2869&im=1[/url]
Top
Posts: 1850
Joined: Sat Mar 11, 2006 4:24 pm
Location: Melbourne

Post by Deleted User »

BEN_R wrote:Mate ive got a set of old 29s you can have come get them

these one's
Image




Is it me, or do those hubs seem to be sticking out tooooo far ? Whats the story there ?
Could be the angle of the photo ?





.
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

TheGatta wrote: Is it me, or do those hubs seem to be sticking out tooooo far ? Whats the story there ?
Could be the angle of the photo ?
.
thats split rims for ya ;)
no offset
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 98
Joined: Sat Jun 23, 2007 1:53 am
Location: Glenbrook NSW

Post by BEN_R »

Yep gotta love them
1989 Nissan Patrol GQ, 4.2 Turbo Diesel, 4'' Spring Lift, 2'' Body Lift
[url]http://www.4wdmonthly.com.au/shed/index.php?id=2869&im=1[/url]
Top
Posts: 706
Joined: Fri Dec 31, 2004 10:31 am
Location: some where between armidale and sydney.....

Post by TYLER »

this is wat i did to my truck to lower it 3" IFS springs outta the new model lux, and lowered front springs with custom packs, i also remounted my shocks on the back and put commo shocks in the front, is flexie as and low, i had that set up with 35" micky claws and it sat at almost stock height.... dunno if thats anyhelp mate

TYLER :twisted:
[b][i][u][color=#0000BF] just another nutter with a hilux [/color][/u][/i][/b]
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

TYLER wrote:this is wat i did to my truck to lower it 3" IFS springs outta the new model lux, and lowered front springs with custom packs, i also remounted my shocks on the back and put commo shocks in the front, is flexie as and low, i had that set up with 35" micky claws and it sat at almost stock height.... dunno if thats anyhelp mate

TYLER :twisted:
35's at sock hieght, so you have your springs in upside down? any car with 35's and no lift will be higher than stock by miles... :?:

oh and m8 i swap for dd tires all the time, easy as, as said, rattle gun and a jack.. with the tires beside me ready to roll and compreesor pumped up my record time is 2.5 mins with a m8 helping. if thats not quick enuf then fark me :rofl: without a mate 5min
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 71
Joined: Tue Mar 27, 2007 2:27 am
Location: brisbane

Post by dirty dirty 4x4 »

I agree compressor and rattle gun is the way to go you can pick up a cheap 2 1/2 horse compresor gun and other tools for $300 and thats new or you could get a lange 4x4 comp and a realy big tank you could even use your tools on the track might take a wile to fill up tho
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Top
Posts: 34
Joined: Thu Oct 11, 2007 2:21 pm
Location: Albany, WA

Post by Taco-klng »

Or You could Spend 50$ on hireing a Nuematic Jackhammer for a day. and take the front bit of the slab out and 20$ for a bag of cement and Angle it down so you can get yo Beast in there in one go??

Hell of alot cheeper and less time consuming than a Rattle gun and new tyres lol

Hope i can be a help:P

Roddy
1990 Toyota 4Runner, Full //Alpine Sterio System :P
Plan to: +2" Lift, +ARB Airlockers.. Front and Rear!!! , ARB Winch, Paint Her Gloss Black, Dark Tint, Custon Exhaust
START SAVING TA DOLLARSZZ
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 66 guests