Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ET2's ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

ET2's ???

Post by Thommo 73 »

whats better for winch challanges 35X11.5 or 36.5 x 12.5??
1uzed and no home for it
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

Are you serious?

Thats like asking whats better for flipping eggs a metal or plastic spatula..

12.5 have a larger contact area, seem to be better on rocks.

11.5 being a narrower tyre seem to cut threw mud bettter. The 10.5s better again, but all up its much of a muchness..

As for actual size I guess it depends on what class you want to race in. Id say some comps 36" simex don't fit in trophy class.. So its up tp you I guess.
Posts: 478
Joined: Tue Jul 18, 2006 8:43 pm
Location: outer east Melb.

Post by MUD EMPIRE »

It's been proven time and again that the three lug 36 is better for winch comps as it 'handles' better at high speed and provides more flotation for deep mud (ground clearance not so much of an issue). You could have won the VicWinch with a 4WD Race Truck and not bothered with a winch or crossply tyres..........go a 37 X 17 radial and you'll eat the oppisition....












just stiring up some comment on the comp scene............
What ya think....??
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

dont think they'll let me race in the trophy class any way with a v8 and coil conversion. i heard that some of the comp guys were going back to 35x11.5's over the 36's. BS or true? aimimg at events like cliffhanger and vic winch.... etc
1uzed and no home for it
Posts: 161
Joined: Wed Sep 14, 2005 4:57 pm
Location: Auckland, NZ

Post by NZ4x4 »

Thommo 73 wrote:dont think they'll let me race in the trophy class any way with a v8 and coil conversion. i heard that some of the comp guys were going back to 35x11.5's over the 36's. BS or true? aimimg at events like cliffhanger and vic winch.... etc
In New Zealand almost all the comp guys have gone back to the 35x11.5

But we have different terrain to you guys
[b]86 Nissan MK Patrol[/b] - In bits atm, be back together soon
[b]MWB GQ Patrol[/b] - Being built, 383 chev, coilovers, etc

[url]http://www.kiwiracing.co.nz[/url]
Posts: 256
Joined: Thu Jul 08, 2004 9:16 am
Location: Melbourne

Post by Ossie »

The 35 x 11.5 is a narrower and lighter tyre allowing engines (especially Diesels) to rev a bit quicker.

As stated above 2 lugs clear better than three lugs in mud.

But Vic winch (certainly this year) and cliffhanger the three lugs may be better.

Jason
TIGGR6 - Got the plates but not the car...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests