Hi I just got a set of Lightforce Hid's to replace my 240 Xgt's and are a little dissapointed with the light .It seems patchy and too consentrated. I was wondeing if anyone else has had this problem and if so what set up have you used...spacers ,covers ect
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LightForce 35w HID Set up
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: LightForce 35w HID Set up
I'll swap you my 240's for them.
Re: LightForce 35w HID Set up
You bought "real" LF 240 HID's?????Miklie wrote:Hi I just got a set of Lightforce Hid's to replace my 240 Xgt's and are a little dissapointed with the light .It seems patchy and too consentrated. I was wondeing if anyone else has had this problem and if so what set up have you used...spacers ,covers ect
Cheers
If so, then, umm, Why? (just thinking of the dollar factor, thats all)
Two years ago when I first really looked at a pair of 35w LF 240 HID's, I too was highly disappointed, especially when me single modified 240 Blitz with a 50w kit 5000k in it blew the two real ones away. The owner was also blown away....
Try the clear wide spread lenses. They may help a tad.
May also need to adjust the bulb in/out to get the correct focal offset if it is too concentrated.
Black spots appearsing in a single XGT with a 55w kit installed:
http://www.youtube.com/watch?v=i33f7dkUTAo
With the wide spread cover lens:
http://www.youtube.com/watch?v=33akU_zFo6Q
These were done with one hand holding camera, the other hand performing miracles by holding XGT light and adjusting/sliding the heatsink with bulb.
Was mainly video'ed to show the black spots that appear due to the standard design of the H3 metal halide bulb. The top of them are just that --- way too long, which causes these black spots when adjusted outside of the main focal point.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
We have LF HID's on the comp car.
I to was disappointed with there performance.
Firstly there only 4300k so they look yellowish against most other HID's.
Definetly too concentrated and didn't like them with the spacers. One day we will play around with spacing to see if we can make it better.
I couldn't justify the dollars for them at all.
Bruce, keep ya 240's. You'd be disappointed if you swapped
I to was disappointed with there performance.
Firstly there only 4300k so they look yellowish against most other HID's.
Definetly too concentrated and didn't like them with the spacers. One day we will play around with spacing to see if we can make it better.
I couldn't justify the dollars for them at all.
Bruce, keep ya 240's. You'd be disappointed if you swapped
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Who is online
Users browsing this forum: No registered users and 0 guests