Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engineers in Sydney

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Engineers in Sydney

Post by CWBYUP »

So I need to find an engineer to use for the chop down of the GQ wagon into a ute.

I'm trying to find someone local or at least easy to get to.

I'm at Mcgraths Hill and have narrowed the list down to a few that are looking good but wanted to know if anyone has experiance with any of them.

Looking at

Rodger Perkins ANNANGROVE

Peter Smith CAMDEN

Lesley Gunaratnam TOONGABBIE

Trevor Booth KURRAJONG

Has anyone used any of these guys ?

Thanks for the info, Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 662
Joined: Thu Jan 23, 2003 8:02 pm
Location: Picton

Post by Tazz »

What other mods are you engineering, if its also a lift and tyres steer well cleer of Peter Smith @ Camden.

He does not like lifts or bigger tyres @ all, cant comment on any of the others though....
Offroad Performance Warehouse
1300 679 494
www.opw.com.au - tazz@opw.com.au
www.jd2.com.au - tazz@jd2.com.au
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Sorry I should have made a list of what i need engineered.

Cab chop XC

2" lift

33"s or 35"s depending on what they will do

Move fuel tank

Shorten Chassis

4 point harnesses for on road is possible

trimed front guards to suit 35's

and thats about it.

Its not crazy by any means.

Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 399
Joined: Mon Nov 25, 2002 5:29 pm
Location: Sydney

Post by AussieCJ7 »

Peter Gillard in Leichardt was good to work with

A little picky on a few points but overall very good to work with and if he could see you doing the right thing he would help you out with advise
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

AussieCJ7 wrote:Peter Gillard in Leichardt was good to work with

A little picky on a few points but overall very good to work with and if he could see you doing the right thing he would help you out with advise
Thanks for that champ, if i cant find anything closer to home I'll check him out.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 662
Joined: Thu Jan 23, 2003 8:02 pm
Location: Picton

Post by Tazz »

Yeh, I wouldnt bother with the Camden guy with that list even tho it's not all that crazy.....
I don't think anyone will engineer the harness' but I could be wrong.
Offroad Performance Warehouse
1300 679 494
www.opw.com.au - tazz@opw.com.au
www.jd2.com.au - tazz@jd2.com.au
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

might be a bit far from you but maybe try consulmotive at peakhurst?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

j-top paj wrote:might be a bit far from you but maybe try consulmotive at peakhurst?
If he was closer thats where i would be going but its a bit hard to organise.

Might have to end up biteing the bullet and going down there though.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 54
Joined: Wed Nov 21, 2007 11:32 am
Location: Queanbeyan

Engineer

Post by nash99 »

I use a guy call Jon Wilson he is located in Canberra but travels to Sydney once a week. He has done the majority of competion trucks in canberra and surrounding areas. Lift kits, rollbars, body chops, etc His company is KZ engineering 0417230074
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Re: Engineer

Post by CWBYUP »

nash99 wrote:I use a guy call Jon Wilson he is located in Canberra but travels to Sydney once a week. He has done the majority of competion trucks in canberra and surrounding areas. Lift kits, rollbars, body chops, etc His company is KZ engineering 0417230074
No worries I'll check him out.

Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

Post by noelb1 »

CWBYUP wrote:
j-top paj wrote:might be a bit far from you but maybe try consulmotive at peakhurst?
If he was closer thats where i would be going but its a bit hard to organise.

Might have to end up biteing the bullet and going down there though.

Nick
nick x2 for consulmotive Ive used this guy for sas on 2000 hilux , no probs at all with the 9"lift , ext shackles on rear and wheel spacers on da front also inc a body lift too.

Noel
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 54 guests