hi, i want to put a body lift on my 60 series.
just need some help of how to do it, do i need to re-ajust something else,
whats the highest lift i can go up. and what the procedure is?
any help will be appreciated.
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series body lift
Moderators: toaddog, Elmo, DUDELUX
body lift
It's been a while since i did a 60 but from memory for a 2", the fan shroud had to be modified/or taken off, your brakelines may need to be lengthened, the steering shaft at the box should be loosened to alow for the extra length. The biggest pain in the ass is the gear sticks. The rough way is to cut the floor section out on both sticks as you wont get 3 and reverse and it wont lock into fwd (we did this just dont cut too much out as the noise come through the hole,may need to cut outsome of the bottom of the inner boot of the sticks too). The neat way is get your sticks bent.
Pretty much check anything that runs from the body to the chassis as you are stretching anything in between if its tight. Am happy to be corrected if anything is wrong. Bring on the mods
Pretty much check anything that runs from the body to the chassis as you are stretching anything in between if its tight. Am happy to be corrected if anything is wrong. Bring on the mods
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
licorice all sorts added
Hey mate what year and level is it? G, GXL, VX?
i had a 89 HJ61 sahara 5sp manual with the push button 4x4. the only thing i had to modify was the fan shroud, i re-drilled the shroud 50mm lower, losen shaft that goes from the steering wheel to the steering box, brake lines were sweet, everything was easy as. gear selector had no worries only thing i had to adjust was the H-N-L Transfer lever, as i couldnt get low range. all i did was got underneith vehicle and there is a rod that goes from the transfer case to the selector in the cabin, mine had like a turn buckle sort on thing on one end, kept adjusting it until i had Low range again, easy as.
Troy
i had a 89 HJ61 sahara 5sp manual with the push button 4x4. the only thing i had to modify was the fan shroud, i re-drilled the shroud 50mm lower, losen shaft that goes from the steering wheel to the steering box, brake lines were sweet, everything was easy as. gear selector had no worries only thing i had to adjust was the H-N-L Transfer lever, as i couldnt get low range. all i did was got underneith vehicle and there is a rod that goes from the transfer case to the selector in the cabin, mine had like a turn buckle sort on thing on one end, kept adjusting it until i had Low range again, easy as.
Troy
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
60
I have a 3" lift and the only things needing attention were the radiator shroud and the transfer lever boot needed some mods. I turned it from north/south to east/west cutting and belting the hump and filled the hole that was left at the top section.
Remember some days your the pigeon and other days your the statue
Who is online
Users browsing this forum: No registered users and 121 guests