Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 intercooler

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

2.8 intercooler

Post by 93lux »

I have read alot of posts from guys that have put intercoolers on 2.8d hiluxs with ct20 turbos on them but no pics/info. Can anyone post pics and info as I wish to fit one and am lacking an idea on how to start.

Thanks
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Mine's fitted with a full Safari Kit, have some pics which i'll post up tomorrow. Front mount between grille and A/C.

Not sure if Safari would just sell the cooler but it seems like the easy, neat and simple option.

Only a small section of the grille needs to be trimmed and one hole in the radiator support trimmed out with a die grinder.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

Post by 93lux »

Thanks look forward to the pics. Is there much power gain in fitting one?
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

No idea, the intercooler was on the car when i bought it.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 64
Joined: Fri Feb 10, 2006 6:55 am
Location: Gympie, QLD

Post by unbreakable »

hey 93lux, here is some pics of my 95 hilux with a TD04 turbo and a top mounted intercooler (off a Mitsubishi Delica)

Image
Image

Give us a hoy if you have any questions
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Just a thought, have you looked at changing out the right angle bends for those with a little more radius?

The 90 degree bends would most likely come close to negating the increase in power from your cooler by way of restriction
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 64
Joined: Fri Feb 10, 2006 6:55 am
Location: Gympie, QLD

Post by unbreakable »

Yeh, totally agree, how you see it is how i bought it. Money willing i want to scrap the 180 degree sharp bends with a tidy stainless steel rolled bend set up.
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

take a serie 4/5 rx7 (mazda) coller (about $50) cut the long small outlet back to about 1.5" from the tank.

cut the bend on your intake back so it is vertical (i.e. cut off so the hole is facing upward. then clamp the cooler in (add bonet scoop too!)

no piping to lose efficiency, the cooler mounts on an angle (who cares) and you have to remove to get to the oil filler. (big deal!) done, will post a pic when i get home.

hope that helps.
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

Post by 93lux »

Cheers look forward to seeing them
Top
Posts: 21
Joined: Thu Nov 10, 2005 8:09 pm
Location: Kingaroy QLD

Post by cathgart »

Well here is my setup, cant remember what the intercooler is off of.

Image

Image

Image

Image
Cheers,
Matt
Top
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

Post by 93lux »

Awesome keep them coming guys. More ideas the better.

Thanks
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

cathgart wrote:Well here is my setup, cant remember what the intercooler is off of.

Image

Image

Image

Image
You would need the intercooler with the pod air intake sitting right near the exhaust :shock:
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Blow a hole in the bonnet and run the pod upright
Fully Sic :armsup:
plenty of parts on the bench
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

that is a series 4/5 rx7 cooler. www.ausrotary.com is the best source ;)
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

What is the 13B intercooler mounted too? Would it be better mounted off of the engine somehow to move when the engine moves.
Top
Posts: 21
Joined: Thu Nov 10, 2005 8:09 pm
Location: Kingaroy QLD

Post by cathgart »

phippsy wrote:What is the 13B intercooler mounted too? Would it be better mounted off of the engine somehow to move when the engine moves.
If you look at it from the front there is a mount on the right hand side underneath it to the engine so it can move with it. Bit hard to see in the pics.
Cheers,
Matt
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

cathgart wrote:Well here is my setup, cant remember what the intercooler is off of.

Image

Image

Image

Image
Its a RX7 intercooler (as previously said), i'm about to put one on mine...
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 120 guests