Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mickey T's on a 2000 Hilux
Moderators: toaddog, Elmo, DUDELUX
Mickey T's on a 2000 Hilux
Hi all
I was lookin at getting a set of 33" Mickey Thompson FC-II on 15in rims for the lux and i was wondering if it was possible to do without any major modifications?
Its a 2000 Extra cab 3L Diesel Hilux with just about everything stock. any info would be greatly appreciated
I was lookin at getting a set of 33" Mickey Thompson FC-II on 15in rims for the lux and i was wondering if it was possible to do without any major modifications?
Its a 2000 Extra cab 3L Diesel Hilux with just about everything stock. any info would be greatly appreciated
Endless brands make it, Old Man Emu, Rancho, Tough Dog, IronMan etc.
Iron Man is pretty cheap and pretty good quality, then you go to something like old man emu, Expensive and very good quality, depends what you are willing to spend really...
There's also snake racing, I am about to put their kit on one of my new model hilux's soon.
Iron Man is pretty cheap and pretty good quality, then you go to something like old man emu, Expensive and very good quality, depends what you are willing to spend really...
There's also snake racing, I am about to put their kit on one of my new model hilux's soon.
I recently put 32x11.5 R15s on 8" rims with a 3.75" backspacing on my 03 Lux with no body lift and 1.5" bj spacers. I've seen 33x12.5 R15s fitted on the same type of lux with a 2.5" body lift, torsion bar crank and some trimming.
To fit 32s:
Cut the flare and inner guard and fold the tab and seam like so
I filled in the gaps with some thin aluminium sheet and silicone and body tape. I ended up riveting the inner guard to the body and aluminium after the first outing cos it got lifted by mud
Otherwise all this crap will end up collecting in your fender and get forced back to your door
The back tires barely fit when fully flexed
To fit 32s:
Cut the flare and inner guard and fold the tab and seam like so
I filled in the gaps with some thin aluminium sheet and silicone and body tape. I ended up riveting the inner guard to the body and aluminium after the first outing cos it got lifted by mud
Otherwise all this crap will end up collecting in your fender and get forced back to your door
The back tires barely fit when fully flexed
Who is online
Users browsing this forum: No registered users and 4 guests