Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Roll Cages & sun visors

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Roll Cages & sun visors

Post by schuler »

Just wondering what people use for their internal fold down sunvisors when they have a cage?

My rangie should be back from the fabricators next week, so i need to start on all the fiddely small things...

Cheers

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Mount to cage?
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

v840 wrote:Mount to cage?
Hi v840,

Yeah i need to mount to cage, i think i remember seeing some hot rod type visors that could clamp around front of cage, but can't find them anywhere.

So i figured some one must have sourced something on here, any input welcome.

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

ring clamps
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

chikoroll_ wrote:ring clamps
Yeah, that bit i get, the problem is in sourcing suitable visors, any ideas?

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 179
Joined: Mon Feb 06, 2006 3:51 pm
Contact:
Contact Spimon_NH

Post by Spimon_NH »

Cable ties and/or duct tape. Problem solved.
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

m

Post by sloshy »

simply dont have them, or a rear view mirror :?
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

make your own

3/6mm ply, a metal rod, the full span of the roofline

cover the ply and rod in 6mm foam, both sides, vinyl around that

make a bracket to house each end of the metal rod, so it clamps it together (bit of metal, drill a hole)

put a thread on the driver side and a wingnut on the end of that, that way you can put tension on it, and clamp it tight so it doesn't flap about in the breeze


connect the rod to the ply, with a key hole style joint (bit of metal cut out so it slides on from the end of the rod, then the ply slides into it, glue it up with megapoxy or similar
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

chikoroll_ wrote:make your own

3/6mm ply, a metal rod, the full span of the roofline

cover the ply and rod in 6mm foam, both sides, vinyl around that

make a bracket to house each end of the metal rod, so it clamps it together (bit of metal, drill a hole)

put a thread on the driver side and a wingnut on the end of that, that way you can put tension on it, and clamp it tight so it doesn't flap about in the breeze


connect the rod to the ply, with a key hole style joint (bit of metal cut out so it slides on from the end of the rod, then the ply slides into it, glue it up with megapoxy or similar
Got a pic ???

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Pick a part, some small Jap Visors maybe?
:rofl: :popcorn: :snipersmile:
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

just this one i just whipped up....
Image
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Thanks chico,

gives me the idea.

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests