Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
blown head gasket in 04 gu zd30
blown head gasket in 04 gu zd30
father in law just bought a zd30 gu has about 100k on the clock.
Had it for less then two weeks and started to blow a bit of white smoke.
he took it back to the mob that he boought it from and they have had it for about 4 weeks saying that it had blown a head gasket
So he has just got it back two days ago and it's done it again, Does this happen often on these motors, the blown head gasket that is.
I know they where hand grenadies but i thought they fixed it by "04"
Had it for less then two weeks and started to blow a bit of white smoke.
he took it back to the mob that he boought it from and they have had it for about 4 weeks saying that it had blown a head gasket
So he has just got it back two days ago and it's done it again, Does this happen often on these motors, the blown head gasket that is.
I know they where hand grenadies but i thought they fixed it by "04"
Second hand cars are always landmines. Nissan, Toyota, ZD30 fitted or not. :(
Sounds like they fixed it with chemiweld.
You have every legal right to have them fix the vehicle to a proper standard. Blown HG in a ZD30 is pretty rare - almost certainly a sign of other issues I would hazard.
Goodluck with getting the dealer to fix it. Make as much noise as humanly possible - its the only way to fix things with alot of these mobs.
Sounds like they fixed it with chemiweld.
You have every legal right to have them fix the vehicle to a proper standard. Blown HG in a ZD30 is pretty rare - almost certainly a sign of other issues I would hazard.
Goodluck with getting the dealer to fix it. Make as much noise as humanly possible - its the only way to fix things with alot of these mobs.
Recently after a trip to perth ( approx 1500k),cracked the head causing Hydraulic Lock(repair bill of $2200 with me doing the work).Car had just ticked over 100,000k's.
Talked to the guy's at perth head exchange ,he informed me that he imports from japan 30 heads a month,most recent failure 2005 model.
These heads commonly crack,the amount of meat between injector hole,glowplug hole, valves is only 4-5mm.not much when high temps get involved.
Many posts on the problems with these motors,do a search.
cheers dkne5.
Talked to the guy's at perth head exchange ,he informed me that he imports from japan 30 heads a month,most recent failure 2005 model.
These heads commonly crack,the amount of meat between injector hole,glowplug hole, valves is only 4-5mm.not much when high temps get involved.
Many posts on the problems with these motors,do a search.
cheers dkne5.
Re: blown head gasket in 04 gu zd30
no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...Wish I had coils wrote:... but i thought they fixed it by "04"
Touche you poor unfortunate foolRoldIT wrote:... and Toy-yodas are inferior than Nissans in many, many more ways.Simo63 wrote:Well you were wrong weren't you Nissan's are inferior to Toyota in many waysWish I had coils wrote: It's really bad i told him nissans where better then toyotas and all he has had is problems.
TD 80 Series, F&R Lockers, Winch etc
Re: blown head gasket in 04 gu zd30
They will "fix it" when they drop the shitter from the range becasue it can't meet Euro IV emissionsbogged wrote:no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...Wish I had coils wrote:... but i thought they fixed it by "04"
TD 80 Series, F&R Lockers, Winch etc
its the old story when you hear bad things about a certain motor it only a rumor until it happens to you then its a fact i was bitten by the good old toyota surf not once but twice should had taken the advice and left the car their stuff the oil burner there will always problems in end and they cost
Re: blown head gasket in 04 gu zd30
They did. Chucked some different pistons in it, a different head and common rail injection.Simo63 wrote:They will "fix it" when they drop the shitter from the range becasue it can't meet Euro IV emissionsbogged wrote:no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...Wish I had coils wrote:... but i thought they fixed it by "04"
It is now EuroIV compliant. Also has more low down torque (still a 4 banger though).
And so far so good with the ZD30 CRD's. No confirmed cases of them melting yet - which is a bit different from the original ZD30 Di's which started melting less than 10,000km into their lives.
The temp is not riseing at all, The guy he bought it off told him it was the lightforce lights on the front that is the problem And said to take them off or it will void his warranty.
But it not the temp does not rise at all.
Just uses coollent like crazy and blows white smoke on start, somtimes and sometimes not, And is hard to start (ie Takes a bit of cranking, should start easier)
But it not the temp does not rise at all.
Just uses coollent like crazy and blows white smoke on start, somtimes and sometimes not, And is hard to start (ie Takes a bit of cranking, should start easier)
Yep,sounds just like mine was before it died.
Didn't use heaps of coolant probably a litre over 1500k,but when the head finally gave out used all of it.Never been overheated in the time I have had it 35000k's to 101000k's.
As I said previously head is now fixed.uses no coolant,runs heaps better and doesn't smoke like a train.
First I knew of mine failing was it struggled to turn over(still did but slower than normal)then bang hydraulic lock + wouldn't turn over at all.Numbers 3+4 were full of coolant,probably lucky I didn't bend a conrod.
15 hr job to remove head + put back on with new studs etc.Keep us posted on the repairs.
Didn't use heaps of coolant probably a litre over 1500k,but when the head finally gave out used all of it.Never been overheated in the time I have had it 35000k's to 101000k's.
As I said previously head is now fixed.uses no coolant,runs heaps better and doesn't smoke like a train.
First I knew of mine failing was it struggled to turn over(still did but slower than normal)then bang hydraulic lock + wouldn't turn over at all.Numbers 3+4 were full of coolant,probably lucky I didn't bend a conrod.
15 hr job to remove head + put back on with new studs etc.Keep us posted on the repairs.
Re: blown head gasket in 04 gu zd30
That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?Yom wrote: They did. Chucked some different pistons in it, a different head and common rail injection.
It is now EuroIV compliant. Also has more low down torque (still a 4 banger though).
And so far so good with the ZD30 CRD's. No confirmed cases of them melting yet - which is a bit different from the original ZD30 Di's which started melting less than 10,000km into their lives.
TD 80 Series, F&R Lockers, Winch etc
Re: blown head gasket in 04 gu zd30
With over 80% of patrol sales being diesel, yeh, someone's told you a porky.Simo63 wrote:
That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?
Mind you I would not say no to a 4.8L on LPG....
mate your better off to fix it yourself, at least you know it will be fixed properly rather than the "1800" peso car yard rebuild in a can. They will do everything they can to get out of fixing it properly and tell you anything, seen it all before with a "rebuilt" 1Hz which was worse after the "rebuild"
cheers
cheers
Re: blown head gasket in 04 gu zd30
I would expect the whole patrol range to go if that happened.. which wouldnt suprise me at all sadlySimo63 wrote:That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?
Ring them up.
Tell them its farked.
Get them to come and get it on a trailer.
When they say to drive it in get them to fax a letter to you saying they authorise it (on a letterhead) and any damage will be covered under warrantee.
Speak to the MTA.
Then hold the pecker flat and blow it up
Tell them its farked.
Get them to come and get it on a trailer.
When they say to drive it in get them to fax a letter to you saying they authorise it (on a letterhead) and any damage will be covered under warrantee.
Speak to the MTA.
Then hold the pecker flat and blow it up
Short GQ, Petrol, Turbo.
GQ TD42 ute
GQ TD42 ute
Re: blown head gasket in 04 gu zd30
http://cgi.ebay.com.au/TWIN-TURBO-1UZFE ... dZViewItem
heres a good replacement engine for you.
500HP TWIN TURBO V8 CONVERSION FOR GQ/GU NISSAN PATROL
EVERYTHING TO CONVERT YOUR STANDARD NISSAN PATROL TO 500HP V8
INCLUDES THE FOLLOWING:
CUSTOM BELLHOUSING
CUSTOM FLYWHEEL
CUSTOM CLUTCH
T28 RS BALL BEARING TURBOS
MANIFOLDS
PIPING
INTERCOOLER
EMS COMPUTER
1UZFE 4L V8 ENGINE
FUEL SYSTEM
THIS HAS BEEN A PROVEN CONVERSION IN A GQ NISSAN PATROL RACE TRUCK FOR THE PAST 2 YEARS, WITHOUT FAULT.
TURBO KIT WILL SUIT LEXUS, SOARER, CELCIOR
PLEASE PHONE CHRIS ON 0438 279 890 FOR ANY FURTHER INFO
heres a good replacement engine for you.
500HP TWIN TURBO V8 CONVERSION FOR GQ/GU NISSAN PATROL
EVERYTHING TO CONVERT YOUR STANDARD NISSAN PATROL TO 500HP V8
INCLUDES THE FOLLOWING:
CUSTOM BELLHOUSING
CUSTOM FLYWHEEL
CUSTOM CLUTCH
T28 RS BALL BEARING TURBOS
MANIFOLDS
PIPING
INTERCOOLER
EMS COMPUTER
1UZFE 4L V8 ENGINE
FUEL SYSTEM
THIS HAS BEEN A PROVEN CONVERSION IN A GQ NISSAN PATROL RACE TRUCK FOR THE PAST 2 YEARS, WITHOUT FAULT.
TURBO KIT WILL SUIT LEXUS, SOARER, CELCIOR
PLEASE PHONE CHRIS ON 0438 279 890 FOR ANY FURTHER INFO
i've got a td42 and i had some but not all of the problems you have. i had white smoke on start up and a biatch to crank over. no leaking coolant though. the problems: split fuel line and poor earth. $50 later and so far, it's all good.
88 td42 gq. 2" body & 3" OME, 36" beadlocked 'pedes, ARB winch bar mod'd for body lift, rear locker.....
Who is online
Users browsing this forum: No registered users and 12 guests