Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

blown head gasket in 04 gu zd30

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

blown head gasket in 04 gu zd30

Post by Wish I had coils »

father in law just bought a zd30 gu has about 100k on the clock.
Had it for less then two weeks and started to blow a bit of white smoke.

he took it back to the mob that he boought it from and they have had it for about 4 weeks saying that it had blown a head gasket

So he has just got it back two days ago and it's done it again, Does this happen often on these motors, the blown head gasket that is.
I know they where hand grenadies but i thought they fixed it by "04"
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

they did a dodgy fix and just replaced the gasket .. the heads warped if it keeps blowing out
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

they said that they checked the head and it was fine Buggered if i know I'll find out a little more when he comes round tonight.

It's really bad i told him nissans where better then toyotas and all he has had is problems.
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

Second hand cars are always landmines. Nissan, Toyota, ZD30 fitted or not. :(

Sounds like they fixed it with chemiweld.

You have every legal right to have them fix the vehicle to a proper standard. Blown HG in a ZD30 is pretty rare - almost certainly a sign of other issues I would hazard.

Goodluck with getting the dealer to fix it. Make as much noise as humanly possible - its the only way to fix things with alot of these mobs.
Posts: 73
Joined: Mon Jul 18, 2005 3:16 pm
Location: North WA

Post by dkne5 »

Recently after a trip to perth ( approx 1500k),cracked the head causing Hydraulic Lock(repair bill of $2200 with me doing the work).Car had just ticked over 100,000k's.

Talked to the guy's at perth head exchange ,he informed me that he imports from japan 30 heads a month,most recent failure 2005 model.

These heads commonly crack,the amount of meat between injector hole,glowplug hole, valves is only 4-5mm.not much when high temps get involved.

Many posts on the problems with these motors,do a search.

cheers dkne5.
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Wish I had coils wrote: It's really bad i told him nissans where better then toyotas and all he has had is problems.
Well you were wrong weren't you :finger: Nissan's are inferior to Toyota in many ways :D
TD 80 Series, F&R Lockers, Winch etc
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Simo63 wrote:
Wish I had coils wrote: It's really bad i told him nissans where better then toyotas and all he has had is problems.
Well you were wrong weren't you :finger: Nissan's are inferior to Toyota in many ways :D
... and Toy-yodas are inferior than Nissans in many, many more ways. :finger:
KRiS
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: blown head gasket in 04 gu zd30

Post by bogged »

Wish I had coils wrote:... but i thought they fixed it by "04"
no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

RoldIT wrote:
Simo63 wrote:
Wish I had coils wrote: It's really bad i told him nissans where better then toyotas and all he has had is problems.
Well you were wrong weren't you :finger: Nissan's are inferior to Toyota in many ways :D
... and Toy-yodas are inferior than Nissans in many, many more ways. :finger:
Touche you poor unfortunate fool :finger:
TD 80 Series, F&R Lockers, Winch etc
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Re: blown head gasket in 04 gu zd30

Post by Simo63 »

bogged wrote:
Wish I had coils wrote:... but i thought they fixed it by "04"
no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...
:rofl: They will "fix it" when they drop the shitter from the range becasue it can't meet Euro IV emissions
TD 80 Series, F&R Lockers, Winch etc
Posts: 45
Joined: Mon May 08, 2006 7:14 pm
Location: elimbah

Post by waynejo1 »

its the old story when you hear bad things about a certain motor it only a rumor until it happens to you then its a fact i was bitten by the good old toyota surf not once but twice should had taken the advice and left the car their stuff the oil burner there will always problems in end and they cost
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Re: blown head gasket in 04 gu zd30

Post by Yom »

Simo63 wrote:
bogged wrote:
Wish I had coils wrote:... but i thought they fixed it by "04"
no wasnt it the 01, no hang on I think its the 02, or maybe 09, hang on.. I think its the 2012 they fixed it...
:rofl: They will "fix it" when they drop the shitter from the range becasue it can't meet Euro IV emissions
They did. Chucked some different pistons in it, a different head and common rail injection.

It is now EuroIV compliant. Also has more low down torque (still a 4 banger though).

And so far so good with the ZD30 CRD's. No confirmed cases of them melting yet - which is a bit different from the original ZD30 Di's which started melting less than 10,000km into their lives.
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

The temp is not riseing at all, The guy he bought it off told him it was the lightforce lights on the front that is the problem And said to take them off or it will void his warranty.
But it not the temp does not rise at all.

Just uses coollent like crazy and blows white smoke on start, somtimes and sometimes not, And is hard to start (ie Takes a bit of cranking, should start easier)
Posts: 73
Joined: Mon Jul 18, 2005 3:16 pm
Location: North WA

Post by dkne5 »

Yep,sounds just like mine was before it died.

Didn't use heaps of coolant probably a litre over 1500k,but when the head finally gave out used all of it.Never been overheated in the time I have had it 35000k's to 101000k's.


As I said previously head is now fixed.uses no coolant,runs heaps better and doesn't smoke like a train.

First I knew of mine failing was it struggled to turn over(still did but slower than normal)then bang hydraulic lock + wouldn't turn over at all.Numbers 3+4 were full of coolant,probably lucky I didn't bend a conrod.

15 hr job to remove head + put back on with new studs etc.Keep us posted on the repairs.
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Re: blown head gasket in 04 gu zd30

Post by Simo63 »

Yom wrote: They did. Chucked some different pistons in it, a different head and common rail injection.

It is now EuroIV compliant. Also has more low down torque (still a 4 banger though).

And so far so good with the ZD30 CRD's. No confirmed cases of them melting yet - which is a bit different from the original ZD30 Di's which started melting less than 10,000km into their lives.
That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?
TD 80 Series, F&R Lockers, Winch etc
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

well it has emptied the coolent resevoir out once or twice since he has had it back.

It's not looking good. :cry:

Aparently it cost the car yard $1800 to fix this time Buy the sound of it he might be up for a bit more in the not to distant future


Merry christmas.
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Re: blown head gasket in 04 gu zd30

Post by Yom »

Simo63 wrote:
That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?
With over 80% of patrol sales being diesel, yeh, someone's told you a porky.

Mind you I would not say no to a 4.8L on LPG.... :D
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

mate your better off to fix it yourself, at least you know it will be fixed properly rather than the "1800" peso car yard rebuild in a can. They will do everything they can to get out of fixing it properly and tell you anything, seen it all before with a "rebuilt" 1Hz which was worse after the "rebuild"



cheers
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: blown head gasket in 04 gu zd30

Post by bogged »

Simo63 wrote:That's interesting, I had heard they were dropping the Diesel in 2009. Must be a myth?
I would expect the whole patrol range to go if that happened.. which wouldnt suprise me at all sadly
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

Post by blackmav »

Ring them up.
Tell them its farked.
Get them to come and get it on a trailer.
When they say to drive it in get them to fax a letter to you saying they authorise it (on a letterhead) and any damage will be covered under warrantee.
Speak to the MTA.

Then hold the pecker flat and blow it up :D
Short GQ, Petrol, Turbo.
GQ TD42 ute
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

Well the guy has been very good, As good as they get any way.

It goes back on the 2nd,

Had a thought that it may be the turbo Leaking the water, so the guy said he would have a look. So fingers crossed lets see how it goes when he gets it back this time.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: blown head gasket in 04 gu zd30

Post by bogged »

http://cgi.ebay.com.au/TWIN-TURBO-1UZFE ... dZViewItem

heres a good replacement engine for you.



500HP TWIN TURBO V8 CONVERSION FOR GQ/GU NISSAN PATROL

EVERYTHING TO CONVERT YOUR STANDARD NISSAN PATROL TO 500HP V8

INCLUDES THE FOLLOWING:

CUSTOM BELLHOUSING

CUSTOM FLYWHEEL

CUSTOM CLUTCH

T28 RS BALL BEARING TURBOS

MANIFOLDS

PIPING

INTERCOOLER

EMS COMPUTER

1UZFE 4L V8 ENGINE

FUEL SYSTEM



THIS HAS BEEN A PROVEN CONVERSION IN A GQ NISSAN PATROL RACE TRUCK FOR THE PAST 2 YEARS, WITHOUT FAULT.

TURBO KIT WILL SUIT LEXUS, SOARER, CELCIOR

PLEASE PHONE CHRIS ON 0438 279 890 FOR ANY FURTHER INFO
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

nice!!!!!!!!!!!
Posts: 59
Joined: Tue Nov 07, 2006 9:24 am
Location: south-west of the north-east frontier

Post by joelt »

i've got a td42 and i had some but not all of the problems you have. i had white smoke on start up and a biatch to crank over. no leaking coolant though. the problems: split fuel line and poor earth. $50 later and so far, it's all good.
88 td42 gq. 2" body & 3" OME, 36" beadlocked 'pedes, ARB winch bar mod'd for body lift, rear locker.....
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Wish I had coils wrote:nice!!!!!!!!!!!
Better than nice mate, it's a Toy yota and soooo much better than a Nissan donk :D
TD 80 Series, F&R Lockers, Winch etc
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

Simo63 wrote:
Wish I had coils wrote:nice!!!!!!!!!!!
Better than nice mate, it's a Toy yota and soooo much better than a Nissan donk :D
don't swear I like nissans, Just don't really like zd30's To many troubles
Post Reply

Who is online

Users browsing this forum: No registered users and 94 guests