Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

roll bars

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 14
Joined: Thu Dec 13, 2007 5:56 am
Location: launceston, tasmania

roll bars

Post by keechox@autospeed.com »

gday,
does anyone know if roll bars off a soft top can be fitted INSIDE a swb tin top? are they short enough in height to fit inside? :?:
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Don't like your chances mate.
Would probably be OK height wise but how do you plan on getting it in there? The back door is smaller than the car.
Image
Last edited by want33s on Mon Dec 24, 2007 8:56 pm, edited 1 time in total.
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Not having a hardtop so this may be totally off the mark but you might be able to feed them through the passenger door if you take both seats out.
;)
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Use a ratchet strap to pull bar together at bottom to get it in , then release it , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

I just put one inside a hardtop - I bought the bar off ebay - I assume it was off a softop. I had to take out both seats, unbolt the seat belts from the B pillers, and take the cover off the interior light! It was a tight squeeze but a bit off pushing here and there by hand and it went in fine.

cheers
MattC
Top
Posts: 356
Joined: Sun Jan 01, 2006 12:47 pm
Location: geelong

Post by ronoor »

or you can sell it to me. ;) ;) :lol: :lol: ;) ;) cheers ron
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

There was a thread on this on zuwharrie and it was decided that with the ends ratchet straped together and the rear door open all the way with the stopper it will just fit. But I remember somthing about rear pads not meeting wheel well but that might have been a thread on jeep bars into zuks??
Nik
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 113 guests