Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stage 1 timing

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 8
Joined: Thu Nov 27, 2003 9:17 am
Location: Brisbane

Stage 1 timing

Post by FrdOz »

Hi all!
I am new to this forrum and request your help.

I have just rebuild the engine in my Stage 1 V8. I am trying to tune it but I can't get the timing right. It is supposed to be TDC @ 750 rpm but the mark is way out.
I still need to check if the TDC mark on the pulley is correct.
My other thought was that the after market cam I fitted may affect the timing, it is a Dynotec PC216.

What do you guys think?

Any suggestions welcome.

Thanks

Fred
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

1. You may of put the dizzy in in the wrong spot.
2. cam may of needed timing in, if so it would need adj front flange.
3. leads may be in wrong order

go back to 1.

Bazzle :)
Top
Posts: 8
Joined: Thu Nov 27, 2003 9:17 am
Location: Brisbane

Post by FrdOz »

1. No
2. What do you mean?
3. No

Thanks

Fred
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

when changing a cam you have to 'dial it in'. meaning there are different advance/retard settings just like on your distributor.

u have to use a dial gauge to see maximum lift of intake valve on no.1 cylinder. and a whole lot of other crap that is hard to explain.
when you bought your cam it should of come with a spec. sheet.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 41 guests